HBA Series 1" to 6" (3 to 15 cm) Wide One-Piece Nozzle Heaters • Nozzle Temps to 1000°F • 42" (107 cm) Leads Standard • Stainless Steel Clamp Included
HBT Series 2" (5 cm) Wide Two-Piece Band Heaters • Rugged, Premium Quality • Stocked for Fast Delivery • Barrel Temperature to 900°F • Terminal Posts for Power Connection.
HBA Series 1" to 6" (3 to 15 cm) Wide One-Piece Nozzle Heaters
Offers Longer Life than mica nozzle heaters. Cost less to operate. Heats up faster and provides more uniform heat distribution. More contact
surface than other refractory insulated nozzle heaters. Will not short out from fouling. The 42" leads are protected by a
36" long closely woven stainless steel sheath. No exposed electrical
connections, and element is sealed to prevent entrance of contaminates. Easier to install. Clamp and heater are separate items and may be
applied from either side. Construction: A 1/2 wide x .200" thick, Incoloy sheath (max. sheath
temperature is 1500°F), magnesium oxide insulated strip heater is tightly spiraled to provide
maximum heat transfer to the work. The lead wires are brazed to the heater terminal pins, insulated and
covered with heavy duty stainless steel outer braiding to provide
mechanical protection.
HBT Series 2" (5 cm) Wide Two-Piece Band Heaters
The HBT series has two matching alloy-sheath (max. sheath temperature is 1200°F) tubular
elements and stainless steel matching clamping band, same as the HB series. Elements are
flattened for maximum transfer.
HBA Series 1" to 6" (3 to 15 cm) Wide One-Piece Nozzle Heaters
† The two 120V elements must be wired in series for 240V.
/* Specify voltage, insert 120 for 120 V or 240 for 240V.
Terminal box, hermetic seals, and flexible leadwire with stainless steel overbraiding are available. See page H-14.
† All dollar amounts on this site are shown in Singapore currency.