|
OM-CP-HITEMP140X2-FP-72-PT-1 |
|
|
|
|
|
|
$1,890.00
OM-CP-HITEMP140X2-FP-72-PT-1
|
|
OM-CP-HITEMP140X2-FP-72 Has Two Flexible Probes
|
|
OM-CP-HITEMP140X2-FP-72-PT-1 and OM-CP-HITEMP140X2-FP-72-PT-5 Have One Flexible Probe and One Stainless Steel Bendable Probe
|
|
Flexible Probe Measures from -60 to 260°C (-76 to 500°F)
|
|
Stainless Steel Bendable Probe Measures from -200 to 350°C (-328 to 662°F)
|
|
Operating Temperature Range (Data Logger): -40 to 140ºC (-40 to 284ºF)
|
|
±0.1°C (0.18°F) Accuracy
|
|
Submersible (IP68)
|
|
Trigger Settings
|
|
Programmable Start and Stop Time
|
|
Ready to Use Right Out-of-the-Box
|
|
Free NIST Certification
|
View related products - Data Loggers
|
| |
|
|
|
The OM-CP-HITEMP140X2-FP Series of dual channel
high temperature data loggers feature a stainless steel
data logger body and are available with either two 183
cm (72") flexible probes (OM-CP-HITEMP140X2-FP-72)
or with one flexible probe and a stainless steel bendable
probe combination (OM-CP-HITEMP140X2-FP-72-PT-1
and OM-CP-HITEMP140X2-FP-72-PT-5).
The dual probes of the OM-CP-HITEMP140X2-FP
Series allow for simultaneous temperature monitoring
and provide flexibility in applications such as oven
mapping, surface temperature monitoring, autoclave
validation and sterilization processes.
The OM-CP-HITEMP140X2-FP-72 model offers two
183 cm (72") long, lightweight, flexible RTD probes
coated with PFA insulation. The FP probe design
allows the probe to be easily maneuvered and is ideal
for temperature monitoring inside test tubes, small vials,
and other delicate applications. The narrow thermistor
probe tip is compatible for use with the
OM-CP-MICRODISC probe attachment allowing for
precise surface temperature monitoring of shelving
and more.
The OM-CP-HITEMP140X2-FP-72-PT-1 and
OM-CP-HITEMP140X2-FP-72-PT-5 models feature a
61 cm (24") stainless steel bendable probe with the
option of either a 2.5 cm (1") or 12.7 cm (5") probe tip
(sheath). The stainless steel probe can be bent, angled,
and coiled in any direction and formed into position as
needed. The sharp probe tip allows for easy insertion
and has an extended measurement range of
-200 to 350°C (-328 to 662°F).
The body of the OM-CP-HITEMP140X2-FP data
loggers are capable of operating in temperatures from
-40 to 140°C (-40 to 284°F). All models have the
capacity to store up to 32,700 time and date stamped
readings and feature non-volatile solid state memory
that will retain data even if the battery becomes
discharged.
The OM-CP-HITEMP140X2-FP utilizes the latest
software. The device can be started, stopped, and data
can be downloaded quickly and easily. Once in the
software, the data can be reviewed in graphic, tabular,
or summary form as well as exported to Excel® for
further analysis and calculations.
SPECIFICATIONS
TEMPERATURE
Temperature Sensor:
OM-CP-HITEMP140X2-FP: Flexible RTD probe
OM-CP-HITEMP140X2-FP-PT: Flexible RTD Probe and
bendable RTD probe
Probe Measurement Range:
Flexible Probe: -60 to 260°C (-76 to 500°F)
Bendable Probe: -200 to 350°C (-328 to 662°F)
Temperature Resolution: 0.01°C (0.02°F)
Calibrated Accuracy: ±0.1°C (±0.18°F)
GENERAL
Reading Rate: 1 reading every second up to 1 reading every
24 hours
Memory: 32,767 readings
Start Modes:
• Software programmable immediate start
• Delay start up to 18 months in advance
Stop Modes: Manual or Timed (specific date and time)
Real Time Recording: May be used with PC to monitor and
record data in real time
Password Protection: An optional password may be programmed into the device to restrict access to configuration options. Data may be read out without the password
Readings in Trigger Settings Mode: 16,383 readings
Trigger Settings: High and Low limits may be set. Once data meets or exceed set limits, the device will record to memory. Bi-level start and stop triggers can also be programmed. Users can specify the number of readings to take after the device
triggers. (Triggering on channel 1 only)
Memory Wrap Around: Yes (software selectable)
Battery Type: 3.6V high-temperature lithium battery included;
user replaceable
Battery Life: 1 year typical [1 minute reading rate at 25°C (77°F)]
Calibration: Digital calibration through software
Calibration Date: Automatically recorded within device
Data Format: Date and time stamped °C, °F, °R, K
Time Accuracy: 1 minute/month @ 25°C (77°F)
Computer Interface: OM-CP-IFC400 USB docking station or OM-CP-IFC406 multiplexer interface required; 125,000 baud
Software: Windows XP SP3/Vista/7 and 8 (32- and 64-bit)
Operating Environment: -40 to 140°C (-40 to 284°F), 0 to 100% RH, 0.002 to 100 psia
IP Rating: IP68
Dimensions (Body): 48 H x 24.6 mm dia (1.89 x 0.97")
Dimensions (Probe):
OM-CP-HITEMP140X2-FP-72:
Flexible Probe: 1829 L x 2.5 mm dia (72 x 0.1")
OM-CP-HITEMP140X2-FP-72-PT-1 with 2.5 cm (1")
Bendable Probe:
Probe Tip: 42 L x 3.2 mm dia (1.7 x 0.125")
Bendable Portion: 559 L x 1.6 mm dia (22 x 0.062")
OM-CP-HITEMP140X2-FP-72-PT-5 with 12.7 cm (5")
Bendable Probe:
Probe Tip: 121 L x 3.2 mm dia (4.8 x 0.125") with 25 L x 4.8 mm dia (1 x 0.188") handle
Bendable Portion: 559 L x 1.6 mm dia (22 x 0.062")
Weight:
OM-CP-HITEMP140X2-FP-72: 115 g (4.1 oz)
OM-CP-HITEMP140X2-FP-72-PT: 110 g (3.9 oz)
Materials:
Body: 316 stainless steel, PEEK
Bendable Probe: 316 stainless steel
Flexible Probe: PFA insulated cable
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in Singapore currency.
Note: Comes complete with 3.6V lithium battery. Operator’s manual and USB interface cable are included with the OM-CP-IFC400 software/cable package or OM-CP-IFC406 multiplexer (required for data logger operation, sold separately).
Ordering Example: (1) OM-CP-HITEMP140X2-FP-72 High temperature data logger with two 183 cm (72, $1,790.00
|
|
|
|
|
| |
Related Links -
Software, Related Products
|
Software |
Download OM-CP Data Logging Software |
Download OM-CP software |
Related Products |
|
|
|
|
OM-CP-HITEMP140-PT Series: |
High Temperature Data Logger with 559 mm (22") Stainless Steel Flexible Probe with Optional Thermal Shield |
|
|
|
|
|
|
|
|
|
|
|
|