|
|
 |
|
|
|
Machinery On/Off Data Logging System
 |
| Click for larger image. |
|
|
$500.00
OM-CP-MOTOR101A-KIT
|
| • |
No External Power Required
|
| • |
150 mA Trip Point
|
| • |
Compatible up to 200 A
|
| • |
Real Time Operation
|
| • |
Useful for Energy Audits and Time Studies
|
| • |
Ready to Use Right Out-of-the-Box
|
| • |
Free NIST Certification
|
View related products - Data Loggers
|
| |
|
|
|
 |
The OM-CP-MOTOR101A Series
measures and records on and off
status changes for motors or other
equipment drawing up to 200 Amps.
The state change occurs when the
current switch exceeds the 150 mA
set point. This allows for most basic
equipment to be monitored. The
current switch monitors whether
there is current passing through a
wire around which it is attached.
When the current exceeds 150 mA,
the output changes and provides a
voltage for the
OM-CP-MOTOR101A
to measure. The device can hold up
to 406,323 state changes, but
memory will only be used if the
status has changed. The device can
be programmed to check for status
changes 4 times per second up to
once every 24 hours.
Data retrieval is simple. Simply plug
it into an available USB port and our
user-friendly software does the rest.
The software converts a PC into a
real-time strip chart recorder. Data
can be printed in graphical and
tabular format or exported to a text
or Microsoft Excel® file. The storage
medium is non-volatile solid state
memory, providing maximum data
security even if the battery becomes
discharged.
Specifications
Amperage Range: 0.15 to 200 A
Trip Point: 0.15A (150 mA) fixed (200 mA AC for 50 Hz
operation)
Status Output (Max): N.O. 1.0 A @ 30 Vac/Vdc
Housing: Split core
Reading Rate: 4 Hz to 1 every 24 hr
Memory: 406,323 readings;
software configurable memory wrap
Wrap Around: Yes
Start Modes: Immediate start, delay start up to 18 months,
multiple pushbutton start/stop
Multiple Start/Stop Mode: Start and stop the device multiple times
without having to download data or communicate with a PC
Multiple Start/Stop Mode Activation:
To Start the Device:Press and hold the pushbutton
for 5 seconds, the green LED will flash during this time; the device
has started logging
To Stop the Device:Press and hold the pushbutton
for 5 seconds, the red LED will flash for three seconds and then
the green LED will flashfor two
seconds; the device has stopped logging
Real Time Recording: The device may be used with PC to monitor
and record data in real-time
LED Functionality:
Green LED Blinks: 10 second
rate to indicate logging, 15 second rate to indicate delay start mode
Red LED Blinks: 10 second
rate to indicate low battery and/or full memory
Password Protection: An optional password may be
programmed into the device to restrict access to configuration
options; data may be read out without the password
Engineering Units: Native measurement units can be scaled
to display measurement units of another type such as on/off,
open/closed and more
Battery Type: 3.6V lithium battery
included; user replaceable
Battery Life: 10 years typical,
dependent upon frequency and duty cycle
Time Accuracy: ±1 minute/month
(at 20ºC/68ºF, stand alone data logging)
Computer Interface: USB (interface cable required);
115,200 baud
Software: XP SP3/Vista/7 and 8 (32 and 64-bit)
Operating Environment: -15 to 40ºC (5 to 104ºF),
10 to 90% RH non-condensing
Dimensions (Data Logger):
36 x 56 x 16 mm (1.4 x 2.2 x 0.6")
Current Switch:
54 x 89 x 26 mm (2.1 x 3.5 x 1.0")
Weight: 113 g (4 oz)
With OM-CP-IFC200: 255 g (9 oz)
Materials: ABS plastic
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in Singapore currency.
Note: Comes complete with 3.6 V lithium battery and operator’s manual. OM-CP-MOTOR101A-KIT includes OM-CP-IFC200 Windows software and USB interface cable.
Ordering Example: (1) OM-CP-MOTOR101A-KIT Machinery on/off status data logging system, includes data logger, current switch and OM-CP-IFC200 Windows software and USB interface cable, $500.00
|
|
|
|
|
| |
| Related Links -
Manual, Software
|
| Product Manual |
| Download OM-CP Series - Data Logger and Software User Guide |
| Download Power Cycle Data Logging System |
| Software |
| Download OM-CP Data Logging Software |
| Download OM-CP software |
|
|
|
|
