|
|
|
|
Thermistor Probe Temperature Data Logger with LCD Display
|
Click for larger image. |
|
|
$265.00
OM-EL-USB-TP-LCD
|
|
-40 to 125°C (-40 to 257°F) Probe Measurement Range
|
|
User-Programmable Alarm Thresholds
|
|
High Contrast LCD Display
|
|
USB Interface for Set-Up and Data Download
|
|
Status Indication via Red and Green LEDs
|
|
Immediate, Delayed and Push-to-Start Logging
|
|
Supplied Complete with Replaceable Internal Lithium Battery and Windows® Control Software
|
View related products - Data Loggers
|
| |
|
|
|
The OM-EL-USB-TP-LCD standalone data logger
measures and stores up to 32,510 temperature
readings from the supplied thermistor probe which is
attached via the socket at the base of the unit. The
user can easily set-up the logging rate and start-time,
and download the stored data by plugging the data
logger into a PC’s USB port and running the included
Windows software. Data can then be graphed, printed
and exported to other applications.
The data logger features an LCD display and pushbutton
which allows the user to cycle through the
most recent, highest and lowest stored temperature
readings. The data logger is supplied complete with
a long-life lithium battery, which can typically allow
logging for up to 6 months. The OM-EL-USB-TP-LCD
is suitable for a wide variety of applications including
high and low temperature monitoring, transportation,
food processing, building and site monitoring and
HVAC.
Windows software is supplied free of charge with
each data logger. Easy to install and use, the control
software runs under Windows XP, Vista, 7 and 8.
The software is used to set-up the data logger as
well as download, graph and export data to Excel.
The software allows for the following parameters to
be configured: logger name, temperature units (°C,
°F), logging rate (1 sec, 10 sec, 30 sec, 1 min, 5 min,
30 min, 1 hr, 6 hr, 12 hr), high and low alarms, start
mode (immediate, delayed and push-to-start logging),
display mode (display off, on for 30 seconds after
button press, or permanently on) and data rollover
(allows unlimited logging periods by overwriting the
oldest data when the memory is full).
Thermistor Probe
The probe supplied with the OM-EL-USB-TP-LCD
uses a precision thermistor to sense the temperature.
The probe length may be extended by the use of a
suitable extension cable (use twisted pair with high
quality 3.5 mm jack socket/plugs for best results).
SPECIFICATIONS
Probe Temperature Measurement Range: -40 to 125°C (-40 to 257°F)
Resolution (Internal and Displayed): 0.5°C (1.0°F)
Accuracy (Data Logger Error @ 25°C): ±0.1°C (±0.2°F) typical (does not include thermistor probe error)
Accuracy (Thermistor Probe): See thermistor probe accuracy charts on PDF
Operating Temperature Range (Data Logger): -10 to 40°C (-14 to 104°F)
Memory: 32,510 readings
Memory Wrap Around (Rollover): Yes (software selectable)
Logging Interval: 1 sec, 10 sec, 30 sec, 1 min, 5 min, 30 min, 1 hr, 6 hr, 12 hr
Software: Windows XP/Vista/7 and 8 (32- and 64-bit)
Alarm Thresholds: High/low alarm thresholds for temperature (software selectable)
Start Mode: Immediate, delayed and push-to-start logging (software selectable)
Status Indicators (LEDs): Red and green LEDs. The first LED flashes red to indicate that the OM-EL-USB-TP-LCD is in an alarm condition (logged temperature has exceeded a high or low alarm level). The second LED flashes green to indicate that the OM-EL-USB-TP-LCD is logging normally and is not in an alarm condition.
Power: 1/2 “AA”, 3.6V lithium battery (included)
Battery Life: 6 months typical at 25°C (77°F) (depends on sample rate, ambient temperature and LCD use)
Dimensions:
Data Logger: See dimensional drawing on PDF
Standard Thermistor Probe
Cable: 1 m (3')
Probe Tip: Stainless steel, 25 L x 5 mm dia (1 x 3/16")
Weight: 45 g (1.6 oz)
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in Singapore currency.
Note: Comes complete with Windows software and operator’s manual on CD, protective cap, mounting bracket, 3.6V lithium battery and standard
thermistor probe.
This product page contains items that either have a Lithium Battery installed in the equipment or have a Lithium Battery packed with the equipment. These items as being regulated for air transportation. The following applies:
• No FX1D, FX2D or FX3D can be used as a ship method.
• Only UPS1, UPS2 or UPS3 is authorized.
• For International shipments UPS and DHL can be used. For DHL internationally – Omega only has permission to ship Lithium Batteries no other Hazardous Material.
Ordering Example: (1) OM-EL-PROBE-EXT-CAB-1.5M Thermistor probe extension cable, 1.5 m (5'), $32.00, plus (1) OM-EL-USB-TP-LCD Thermistor probe temperature data logger with LCD display (includes Type 2 standard accuracy thermistor probe), $265.00, $32.00 + 265.00 = $297
|
|
|
|
|
| |
Related Links -
Related Products
|
Related Products |
|
|
|
|
OM-EL-GFX Series: |
Portable Temperature/Humidity Data Loggers With Graphic Display |
|
|
|
|
|
|