|
|
|
|
Air Temperature RTD Probe with M12 Connector
|
Click for larger image. |
|
|
$343.00
PR-25AP-A-1200-0-M12
|
|
Pt100 Wire Wound RTD with Class A Accuracy Standard (Tighter Accuracy Options Available)
|
|
Resistance vs. Temperature and Accuracy per IEC 60751
|
|
Temperature Range: -100 to 250°C (-148 to 500ºF)
|
|
Probe Will Withstand 400 psi (27.6 bar) Differential Pressure Between Airstream and Ambient Conditions
|
|
316L Stainless Steel Probe and Housing with Vent Holes Around Element
|
|
M12, 4-Pin, A-Coded Plug Connector for Easy Installation
|
|
Available With or Without NPT Mounting Threads
|
|
Non-Threaded Probe Can be Used with Optional Handle for Hand-Held Measurements
|
|
Wide Selection of M12 Extension Cables Available.
|
View related products - RTD (PT100) Probes, Elements and Assemblies
|
| |
|
|
|
Our PR-25AP RTD Air Probe combines the availability of the high accuracy sensor options found in our Ultra-Precise RTD probes with the convenience and reliability of our M12 enabled PR-21 probes. The PR-25AP offers RTD accuracies of Class A, AA (formerly 1/3DIN) and 1/10DIN sensing elements with the ease and reliability of the M12 connection.
The PR-25AP RTD is also designed to provide a barrier to airflow between the air stream and the ambient conditions that has been tested to 400 psi with no leakage. The probe is constructed with a 316L stainless steel housing and sheath for strength and corrosion resistance. For ease of mounting, the PR-25AP is available with the following mounting thread options:
1/2NPT
3/8NPT
1/4NPT
Non-Threaded Housing
The mounting thread options above allow the probes to be used in a wide variety of applications, including:
As stand-alone immersion sensors.
Installed directly into your product or process using an NPT threaded port.
The non-threaded design can be combined with our M12-Handle accessory to convert it for hand-held sensing applications.
Other applications using a variety of available compression fittings or other accessories.
The PR-25AP, like all of our M12 enabled probes, comes standard with a 4-wire, 4-pin, M12 A-Coded plug connector for easy assembly to extension cables. This allows it to be used in any 2, 3 or 4-wire measurement system for maximum flexibility. For 1/10DIN accuracy we highly recommend using a 4-wire measurement to take maximum advantage of the tight accuracy option.
When ordering your PR-25AP sensor, don't forget your extension cable. Omega offers a wide selection of extension cables including over molded PVC, Polyurethane and Silicone cables, as well as customized cables in a variety of materials with optional stainless steel braid or hose for improved mechanical protection, and a wide selection of instrument connections.
Connect your PR-25AP RTD sensor to one or more of Omega's wide variety of in-stock controllers, data loggers, transmitters, hand held thermometers, PLCs, or other measurement & control products to complete your measurement or control system. Omega offers a selection of programmable and fixed range transmitters that can be connected directly to the M12 connection of your PR-25AP sensor. There are also wireless transmitter options available.
Specifications:
Metal Parts: 316L Stainless Steel Sheath and Housing.
Connector: 4-Pin "A"-Coded M12 Plug Connector
Standard Mounting Threads: 1/2NPT, 3/8NPT, 1/4NPT, and Non-Threaded
Standard Probe Diameter: 1/4"
Standard Probe Lengths: 6", 12” and 18”
Sensor: Pt100 (100 Ohms at 0°C, .00385 TCR (alpha)) per IEC 60751Accuracy: Class A, AA (formerly 1/3DIN) per IEC 60751 and 1/10DIN
Temperature Range: -50 to 250°C Except for the Connector Which is 85°C Max
Insulation Resistance: 100 Megohms Minimum at 100VDC at Room Ambient
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in Singapore currency.
Note: For 1/3 DIN accuracy, change “-A-” to “-1/3-” after the “-25AP-” in the model number and add $9 to price. For 1/10 DIN accuracy, change “-A-” to “-1/10-” after the “-25AP-” in the model; number and add $36.50 to price. A limited selection of Pt1000 elements are available, please consult sales.
Ordering Example: (1) PR-25AP-A-0600-0-M12 Air Probe, Pt100, Class A, 6, $293.00, plus (1) PR-25AP-A-1200-1/2-M12 Air Probe, Pt100, Class A, 12, $319.00, $293.00 + 319.00 = $612
|
|
|
Part Number Builder |
|
Option Descriptions
|
(1)
|
Accuracy
|
|
Select A for Class A 1/3 for Class AA (Formerly 1/3DIN) 1/10 for 1/10DIN
(2)
|
Probe Length
|
|
Select 0600 for 6" Long 1200 for 12" Long 1800 for 18" Long
(3)
|
Mounting Thread
|
|
Select 0 for No Thread 1/2 for 1/2NPT Thread 3/8 for 3/8NPT Thread 1/4 for 1/4NPT Thread
|
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
|
| |
|
|
|
| |
Related Links -
Related Products
|
Related Products |
|
M12CM-RTD: |
High Temperature M12 Extension Cables |
|
|
|
|
M12CFM RTD Series: |
M12 Cables with Field Mountable Connectors for Resistance Sensors (RTDs) |
|
|
|
PR-26 Series: |
Vibration Resistant and Bendable RTD (Pt100) Probes with M12 Connector and Mounting Threads (Fractional Sizes) |
|
|
|
PR-26 Metric Series: |
Vibration Resistant and Bendable RTD (Pt100) Probes with M12 Connector and Mounting Threads (Metric Sizes) |
|
|
|
|
|
SPRTX-SS Series: |
Miniature Temperature Transmitter for Sanitary RTD Probes and Sensors |
|
|
|
|
|
|
|
|
Keywords:Pt100, RTD, Air Sensor, M12, M12 Connector, Air Temperature, Air Temp, Wire Wound RTD, Air Sensor, Air Probe,
|
Back to top
|
|