Verbalizes 0 to 10 Vdc Voltage, 0 to 20mA Current, and Type K Thermocouple Inputs in Engineering Units
•
Portable, Handheld High Performance Design
•
Built-In Speaker and Earphone Jack
•
Over 100 Built-In Engineering Units to Choose From
•
RS232 PC Interface Allows User to Configure the Unit
•
High and Low Alarm, Programming
•
Command/Continuous Speech Mode Selection
•
Verbalizes Signals While Connected to Other Measurement and Control Devices
•
Front Keypad Provides Input Selection, Command Talk and Volume Control
•
Powers From 2 "AA" Size Batteries or DC Adaptor Input (Batteries and AC Adaptor are Included)
•
Decorative Table Top Stand included for ease of operation
•
NOT INTENDED TO BE USED IN MEDICAL APPPLICATIONS OR USED ON HUMANS
•
TRY THE INTERACTIVE DEMO BELOW!
The UV1000 series has been discontinued. You can contact our Sales Department to check on any remaining stock.
The new UV1000 OMEGASAYS® universal verbalizer
is a handheld, process-signal to speech device that actually talks! It can can verbalize
0 to 10 Vdc, 0 to 20 mA, and Type K thermocouple
inputs. Configure the verbalizer using the RS232 PC
interface to specify the input range, engineering scale,
engineering unit, and high and low alarm set-points.
Select from over 100 engineering units while
configuring the verbalizer. The front keypad allows the
user to select different inputs, command talk, and
adjust volume control. The UV1000 is a perfect
solution for verbalizing any type of control signal
where a local display may not be available.
TRY THE INTERACTIVE DEMO BELOW!
Specifications Voltage Input: 0 to 1 Vdc, 0 to 5 Vdc, 0 to 10 Vdc Current Input: 0 to 20 mA, 4 to 20 mA Analog Input Accuracy: 0.2% of full scale Thermocouple Input: Type K, SMP connection Thermocouple Range: -100 to 871°C (-148 to 1600°F) Thermocouple Input Accuracy: 2°C (3.6°F) Command/Continuous Talk: Set via slide switch High & Low Alarm Set Points: Set via RS232 PC interface Engineering Scale: Set via RS232 PC interface Engineering Unit: Set via RS232 PC interface Volume Control: Set via keypad, 8 levels at 4 dB intervals Power: 2 "AA" size batteries, or AC adaptor (both included) Power Indication: Red LED Low Battery Indication: Red LED, flashing Speech Sampling Rate: 8 KHz Speaker: Built-in, 8 Ω Battery Life: 40 Hours: Continuous talking mode (alkaline battery) 160 Hours: Continuous talking mode (lithium battery) Operating Ambient Temperature: 0 to 50°C (32 to 122°F) Operating Relative Humidity: 0 to 95% RH (non-condensing) Dimensions: 120 L x 76 W x 32 mm D (4.75 x 3 x 1.25") Weight: 250 g (0.55 lbs)
NOT INTENDED TO BE USED IN MEDICAL APPPLICATIONS OR USED ON HUMANS
TRY ME! CLICK BUTTONS IN PRODUCT IMAGE!
VerbaviewTM PC software to configure UV1000 verbalizer
UV1000 Configuration From PC
1 Input Selection (Voltage, Current, Thermocouple)
2 Engineering Scale Corresponding to the Input Range
3 Engineering Unit (Select From over 100 Built-In Engineering Units)
4 High and Low Alarm Set Points
5 Decimal Point Selection
6 Factory Default Settings
† All dollar amounts on this site are shown in Singapore currency.
Note: Comes complete with instruction manual, Type K beaded thermocouple, test leads, earphone cable, RS232 cable, CD program, 2 "AA" size batteries, AC adaptor, and a decorative stand.
