The OMEGALUX™ WS series strip heater features 2 terminals placed at a right angle on one end.
A standard width of 2½ inches makes them ideal for most strip heater applications.
CAUTION AND WARNING
Fire and electrical shock may result if products are used improperly or installed or used
by non-qualified personnel. See inside back cover for additional warnings.
Dimensions—Inches (cm)
Rust-Resisting Sheath
Chrome Steel Sheath
A
B
D
E
No of Mtg** Hole
Watts
W/In2†
Model No.
Watts
W/In2 †
Model No.
Weight Ib (kg)
6 1/2 (17)
5 1/2 (14)
5 (13)
1 7/8 (5)
2
400
14
WS-640/*
500
25
WS-605/*
.75 (0.3)
8 1/2 (22)
7 1/2 (19)
7 (18)
1 7/8 (5)
3
500
16
WS-850/*
600
19
WS-806/*
1.0 (0.4)
12 (30)
11 (28)
10 1/2 (27)
3 3/8 (9)
4
600
12
WS-1260/*
800
16
WS-1208/*
1.40 (0.6)
15 1/4 (39)
14 1/4 (36)
13 3/4 (35)
2 5/8 (7)
6
750
11
WS-1575/*
1000
14
WS-1501/*
1.88 (0.9)
21 (53)
20 (51)
19 1/2 (50)
2 3/8 (6)
9
850
8
WS-2185/*
1250
12
WS-2101/*
2.28 (1)
25 1/2 (65)
24 1/2 (62)
24 (61)
2 7/8 (7)
11
1000
8
WS-2510/*
1500
12
WS-2515/*
2.63 (1.2)
If terminal housing is required with a WS strip heater, use a type SE-AC-1 mounted sideways. (See page C-23).
Ceramic post terminal insulators can also be used. (See page C-23).
* Designate voltage , i.e., insert 120 for 120 Vac or 240 for 240 Vac.
** 21/64 " diameter holes optional. Standard heaters have two mounting holes.
† To determine maximum allowable watt density, see Figures C-8 or C-9.
† All dollar amounts on this site are shown in Singapore currency.