|
|
|
|
|
|
$114.00
TC-J-NPT-G-72
|
|
Rugged 304SS Design with Strain Relief Spring
|
|
Fiberglass Leads Protected with Steel Overbraiding.
|
|
Striped Leads, Standard. SMP Connectors, Optional
|
|
Choice of J, K,T, or E Thermocouple Types
|
|
1/4 NPT or 1/8NPT Mounting Treads
|
|
Grounded, Ungrounded or Exposed Junctions
|
|
Temperature Range to 650°C [1200°F] (Transition Junction/Cable to 480°C [900°F])
|
View related products - Thermocouples
|
| |
|
|
|
PIPE PLUG TTHERMOCOUPLE PROBES
These high pressure thermocouple plug sensors are ideal for vessel applications, pressurized containers and applications requiring mounted NPT security. The 304SS sheath has a 6.4mm (1/4") dia. that extends 1/2" from the end of the 1/4 or 1/8NPT pipe plug. Other length sheaths are available. The thermocouple-grade lead wires are stranded 20 AWG, fiberglass insulated, and stainless steel overbraided with stripped leads. Connectors are attached on request. Junctions are grounded or ungrounded for a pressure rating of up to 2500 psi. Exposed junctions are available for air or gas temperature measurements at ambient pressures. To tighten mounting threads, there is a hex section that is 22mm (.56") across flats that are 5.8mm (.23") wide.
View the Thermocouple Accuracy and Color Code charts
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in Singapore currency.
Note: For miniature connector add "-SMP" to part number and add $5 to price. (OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$) * Specify calibration: J, K, T or E. ** Specify junction type: G (Grounded), E (Exposed), U (Ungrounded). For lead wire length over 2 m (80"), use additional price per 300 mm (12") increments and modify model number. Use $2.25/ft for single and $4.00/ft for "-DUAL"
Ordering Example: (1) TC-J-NPT-G-72 Type J Grounded Pipe Plug Probe, $114.00
|
|
|
Part Number Builder |
|
Option Descriptions
|
(1)
|
Calibration
|
|
Select -J for J Calibration -K for K Calibration -T for T Calibration -E for E Calibration
(2)
|
Thread
|
|
Select -NPT for 1/4 NPT -1/4NPT for 1/4 NPT (Required for Dual Option) -1/8NPT for 1/8 NPT
(3)
|
Junction Type
|
|
Select -G for Grounded -E for Exposed -U for Ungrounded
(4)
|
Cold End Termination
|
|
Select Nothing(leave field blank) for No termination -SMP for SMP Connector
(5)
|
DUAL Probe
|
|
Select Nothing(leave field blank) for Standard -DUAL for Dual Probe Element
|
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
|
| | | |
|
|
|
| |
Related Links -
Related Products
|
Related Products |
|
|
|
|
OSTW-CC Series: |
Thermocouple Connector Standard Size Round 2 Pin includes Integral Cable Clamp Cap |
|
|
|
|
|
|
|
|
|
Back to top
|
|