Cart  |  Contact  |  Help  | 
Toll-Free in Malaysia: 1800 88 3496
International+65 6415 5353

Low Profile Industrial Grade Accelerometers

ACC787A

Industrial Low Profile Accelerometer | ACC787A

Industrial Low Profile Accelerometer

MYR1,305.00 ACC787A

  • Corrosion Resistant
  • Reverse Wiring Protection
  • Rugged Industrial Design
  • Ground Isolated
  • ESD Protection
Dynamic Measurement - View related products

Description

The OMEGAROMETER Series accelerometers are one of the best accelerometers designed for industrial vibration measurements. These accelerometers feature a hermetically sealed 316L stainless steel case suitable for harsh environments. The ACC787A is a general purpose accelerometer with a low profile side cable exit.

SPECIFICATIONS
DYNAMIC
Sensitivity, ±10%, 25°C (77°F): 100 mV/g
Acceleration Range1: 80 g peak
Amplitude Non-Linearity: 1%
Frequency Response:
   ±10%: 1.0 to 5000 Hz
   ±3 dB: 0.7 to 10,000 Hz
Resonance Frequency: 22 kHz
Transverse Sensitivity, Max: 5% of axial
ELECTRICAL
Power Requirement:
Voltage Source1: 18 to 30 Vdc
Current Regulating Diode1,2: 2 to 10 mA
Electrical Noise, Equiv. g Nominal:
Broadband: 2.5 Hz to 25 kHz: 700 µg
Spectral:
   10 Hz: 10 µg√Hz
   100 Hz: 5 µg√Hz
   1000 Hz: 5 µg√Hz
Output Impedance, Max: 100 Ω
Bias Output Voltage, Nominal: 12 Vdc
Grounding: Isolated case, internally shielded
ENVIRONMENTAL
Temperature Range: -50 to 120°C (-58 to 248°F)
Vibration Limit: 500 g peak
Shock Limit: 5000 g peak
Electromagnetic Sensitivity, Equiv. g, Max: 70 µg/gauss
Sealing: Hermetic to 10-8 cc/s
Base Strain Sensitivity, Max: 0.002 g/microstrain
PHYSICAL
Weight: 145 g (5.1 oz)
Case Material: 316L SS
Mounting: ¼-28 captive hex head screw with 1.2 mm (0.046") diameter safety wire hole
Connector: 2 pin, MIL-C-5015 style
Connections:
   Pin A: Power/signal
   Pin B: Common
Mating Connector: Amphenol 97-3106A-10SL-4S type
Recommended Cabling: ACC-CB7-10

NOTES:
1
To minimize signal distortion when driving long cables or high-vibration signals, 24 to 30 Vdc powering is recommended. The higher-level constant current source should be used when driving long cables.
2 A maximum current of 6 mA is recommended for operating temperatures above 100°C (212°F).

(Specify Model Number)

What Other People Bought: When you see this icon, click on it to expand a list of products that other people have bought when they purchased this model.

Part Number/Desc.
Qty
Description
Quick Ship
ACC787A
ACC787A
MYR1,305.00
Availability: In Stock
 
General purpose accelerometer with side exit connector
Accessories
Quick Ship
ACC-CB7-10
ACC-CB7-10
MYR317.00
Availability: In Stock
 
3.05 m (10') MIL/BNC twisted pair shielded cable
Quick Ship
ACC-CB7-10WP
ACC-CB7-10WP
MYR475.00
Availability: 7 weeks
 
3.05 m (10') waterproof twisted pair shielded cable
Quick Ship
ACC-B3
ACC-B3
Consult Sales  
Availability: 
 
 
Magnetic mounting base for flat surfaces, 30 lb force
Quick Ship
ACC-B5
ACC-B5
Consult Sales  
Availability: 
 
 
Magnetic mounting base for curved surfaces, 30 lb force
Quick Ship
ACC-PS2
ACC-PS2
Consult Sales  
Availability: 
 
 
Rechargeable power supply with built-in amplifier
Quick Ship
ACC-PS3
ACC-PS3
MYR2,785.00
Availability: In Stock
 
115 VAC powered power supply
Quick Ship
  
ACC-PS3-230VAC
Consult Sales  
Availability: 
 
 
230 VAC powered power supply
All prices on this site are shown in Malaysian Ringgit.
Note: ACC787A includes captive mounting screw and calibration data. Specify cable separately, see Accessories. ACC787A + ACC-CB7-10 + ACC-B3 + ACC-PS2, is a typical accelerometer system.
Ordering Example:  (1) ACC-CB7-10 Cable, MYR317.00  plus (1) ACC-PS2 Rechargeable power supply, MYR2,860.00  plus (1) ACC787A Accelerometer, MYR1,305.00, MYR317.00 + 2,860.00 + 1,305.00 = MYR4,482.00