Precision Thermistor Sensor for High-Humidity Environments - Discontinued

ON-940 Series

Precision Thermistor Sensor for High-Humidity Environments

See All Models Below

PLACE ORDER

Small Size Results in Fast Response Time
Thermistor Sensor and Wires are Epoxied into a Molded Housing
Can Be Installed Into a Large Selection of Housings for Special Applications
Available with Resistances of 2252 Ohms, 3000 Ohms, 5000 Ohms, 10,000 Ohms and 30,000 Ohms at 25°C
Standard Accuracy is ±0.2°C between 0 to 70°C, Optional Accuracy of ±0.1°C between 0 to 70°C is Available
Maximum Temperature: 100°C
Available with 12" (305mm) Long PFA Insulated Lead Wires

Thermistor Elements, Probes and Assemblies - View related products

Description

Starting from Jan 25 2018, ON-940 series Precision Thermistor Sensor for High-Humidity Environments will be discontinued. Please see the TH-44000 Series series as a possible alternative or contact our Temperature Engineering department.

This sensor is specifically designed for high reliability, high volume and low cost applications where fast response times and small physical size are important considerations. This sensor can be easily utilized by inserting it into an existing hole for mounting.

(Specify Model Number)

Part Number/Desc.

Qty

Description

ON-940-44004

Consult Sales

Availability:

2252 Ohms at 25°C, ±0.2°C Accuracy Between 0 to 70°C, and Molded Tip with 12" of PFA Insulated Lead Wire

ON-940-44005

Consult Sales

Availability:

3000 Ohms at 25°C, ±0.2°C Accuracy Between 0 to 70°C, and Molded Tip with 12" of PFA Insulated Lead Wire

ON-940-44007

Consult Sales

Availability:

5000 Ohms at 25°C, ±0.2°C Accuracy Between 0 to 70°C, and Molded Tip with 12" of PFA Insulated Lead Wire

ON-940-44006

Consult Sales

Availability:

10,000 Ohms at 25°C, ±0.2°C Accuracy Between 0 to 70°C, and Molded Tip with 12" of PFA Insulated Lead Wire

ON-940-44008

Consult Sales

Availability:

30,000 Ohms at 25°C, ±0.2°C Accuracy Between 0 to 70°C, and Molded Tip with 12" of PFA Insulated Lead Wire

† All prices on this site are shown in Singapore Dollars.
Note: For additional cable length, add required length (in inches) to the end of the Model Number. For a phone plug connector, add "-PP" to the Model Number.