Pressure Transducers - View related products
Internal Shunt Resistor for Easy System Checks
All Stainless Steel Construction
5 Point NIST Traceable Calibration
Hermetically Sealed Double Diaphragm Design for Harsh Environments
Available in Gage, Absolute, Sealed Gage Models
Cable or Connector Models
Optional Pressure Ports to Fit Most Industrial Applications
See Related Links Below for Cables and Accessories
OMEGA’s PX02 Series is a high accuracy, amplified voltage output, industrial pressure transducer. All stainless steel construction and a hermetically sealed case makes the PX02 suitable for harsh industrial environments. It is a true high accuracy industrial device. A broad temperature compensated range of 16 to 71°C (60-160°F) and excellent temperature compensation make this transducer very stable with fluctuating temperatures. The PX02 is available in gage, absolute or sealed models as well as PSI or metric ranges. NPT and 7/16-20 O-ring seal fittings are available for industrial and hydraulic applications.
The PX02 is also available in metric configurations, with G1/4 or G1/8 ports, and
models from 0-160 mbar to 0-400 bar pressure ranges.
Please see the PXM02 for complete details, or contact our Pressure department for more information.
Consult sales for units available with Inconel construction.
Excitation: 24 to 32 Vdc
Output: 0 to 5 Vdc ±10% adj
Linearity: 0.15% FSO
Hysteresis: 0.05% FSO
Repeatability: ±0.05% FSO
Zero Balance: 0 V ±10% adj
Sensing Element: 4 active-arm bridge, using thick film strain gages in a hermetically sealed chamber
Shunt Calibration Value: Specified on Calibration sheet
Operational Temp Range: -46 to 121°C (-50 to 250°F)
Compensated Temp Range: 16 to 71°C (60 to 160°F)
Span:0.0054% of rdg/°C
Zero: 0.0054% of FSO/°C
Proof Pressure: 150% of rated pressure
Burst Pressure: 300% of rated pressure
Wetted Parts: 17-4 PH Stainless Steel
Pressure Port: 1/4 NPT or ¼" HP tube fitting (models ≥10,000 psi) standard; 7/16-20 UNF also available
Style "0" = 3 m cable
Style "1" = PTIH-10-6P connector
Style "6" = micro DIN
See Custom Configurations
Style "1" = PT06F-10-6S (not included)
Style "6" = included
Weight: 170 g (6 oz)
For special options consult Sales or Pressure Engineering.
Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for all available models.
† All prices on this site are shown in Malaysian Ringgit.
Note: (1) 2 and 5 psi Ranges available only on amplified output. (2) 1/4 HP Tube Fitting supplied for ranges 10,000 psi and above. (3)All Gage Pressure Ranges also available in Sealed Gage Pressure.
Ordering Example: (1) PT06F10-6S Mating connector (sold separately), MYR158.00 plus (1) PX02K1-1KG5T is a 1,000 psi gage transducer with 0-5 V output, twist lock connector and 7/16-20 female pressure connection, MYR4,260.00, MYR158.00 + 4,260.00 = MYR4,418.00
Pressure Port select from:C
for 1/4 -18 NPT-MD
for 1/4 -18 NPT-FJ
for 7/16 -20 UNF-MK
for 7/16 -20 UNF-FS
for 1/4 HP Tube Fitting (for models 10000 psi and over)
Electrical Connection select from:0
for 10ft cable (std)1
for PT1H-10-6P Connector5
for Lightening protected Amplifier Box (no charge) (4-20 mA models only)
Range (psi) select from:002
Units select from:G
for Gage ModelA
for Absolute ModelS
for Sealed Gage Model
Output select from:V
for mV/V Output5T
for 0 to 5Vdc Output5Z
for Isolated 0 to 5 Vdc10T
for 0 to 10 Vdc OutputI
for 4 to 20mA Output
Options (Leave blank for no options) select from:
for no options leave blank-OL
for Overload Stops +$65-OX
for Cleaned for Oxygen use (takes 2 weeks +$75)
Note: All combinations may not be valid, check spec sheet for valid part numbers.