Cut To Length Thermocouple Probe, TCCTL, Field adjustable
Thermocouples and RTDs - View related products
Field Cutable to the Length Needed Using a Tubing Cutter [76 mm (3") Length Minimum]
Available in All Base Metal Thermocouple Calibrations (Types J, K, T, E and N)
6 and 4.5 mm (1/4 and 3/16") Diameters Standard
PFA and Two Fiberglass Insulated Cable Options Available
300 Series Stainless Steel Sheath
Standard Length is 600 mm (24")
Large Variety of Mounting and Terminating Options Available
Available in Three Temperature Ranges:
- Standard Type TT PFA insulated cables (Maximum Temperature 260°C (500°F))
- Type GG Fiberglass Insulated Cables (Maximum Temperature 482°C (900°F))
- Type HH Fiberglass Insulated Cables (Maximum Temperature 540°C (1000°F)) (Note: Type HH Not Available in Type T)
† All prices on this site are shown in Malaysian Ringgit.
Note: For 482°C (900°F) Fiberglass cable insulation, change “TT” to “GG” in model number (same price). For 540°C (1000°F) Fiberglass cable insulation, change “TT” to “HH” in model number and add $14 to the price. For a grounded thermocouple tip, change the “U” in the model number to “G” at no additional charge. Note, these cut to length thermocouples are not available in 3mm or 1/8" diameter versions.
Options: Add a standard sized connector by adding “-OTPW” to the model number for additional cost. Add a miniature connector by adding “-SMPW” to the model number for additional cost.
Accessories: Stainless Steel and Brass compression fittings are available for mounting, see “SSLK or BRLK” fittings.
Ordering Example: (1) TCCTL-J-14U-24-40-TT 1/4, MYR286.00 plus (1) TCCTL-J-6U-600-1-TT 6mm Diameter x 600mm Long Type J Thermocouple with 1 meter Long PFA Insulated Cable, MYR286.00, MYR286.00 + 286.00 = MYR572.00
Thermocouple Type select from:J
Probe Outside Diameter select from:1/4
for 1/4 Inch3/16
for 3/16 Inch6
for 6 mm45
Junction Type select from:U
Probe Length select from:24
for 24 Inches600
for 600 mm
Cable Length select from:40
for 40 Inches1
for 1 meter
Cable Type select from:TT
for PFA Insulated (260C or 500F Max)GG
for Fiberglass Insulated (482C or 900F Max)HH
for Fiberglass Insulated (540C or 1000F Max) Not Available in Type T
Note: All combinations may not be valid, check spec sheet for valid part numbers.