Sanitary Thermocouple Sensor With Integral Cable
Sanitary - View related products
1/4" Diameter Probe Design for Standard Duty, or
3/8" to 3/16" Stepped Probe Design For Heavy Duty Applications
Probe Lengths of 3", 4", 5" and 6" Available From Stock, Other Lengths Also Available
Process Connection is a 1½"-16 AMP Tri-Grip (Tri-Clamp® Compatible) Standard Conforming to ASME BPE-2007. Other Cap Sizes and Styles are Available.
Sensor Can be Used in Sanitary, Hygienic and Clean-In-Place Food, Dairy, Beverage and BioPharmaceutical Processes
316L SS Wetted Surfaces with 32 µ in or Better Finish
Includes 2-Conductor (#24AWG Stranded) Special Limits of Error Thermocouple Cable with PFA Insulation and Jacket, 10' Long with Molded Nylon Strain Relief, Longer Lengths Available
Sensor Cables Supplied with Stripped Leads, Optional Connectors, Transmitters and Electronic Instruments are Available.
Ungrounded Type J, K, T or E Thermocouples.
-50 to 200°C (-58 to 392°F) Temperature Range
† All prices on this site are shown in Malaysian Ringgit.
Note: For Type "E" or Type "K" Thermocouples, change "T or J" in Model Number with "E or K" at the same price.For other than the standard 1½-16AMP process connection, change "-D1-" in the model number to the code for the alternate process connection option listed above the "To Order" table and add $20 to the priceFor standard duty probe lengths longer than 6", change "-0600" in model number to the required length (example: 12" = "-1200", 9¼" = "-0925") and add $1 per inch to the price (up to 24 inches).For heavy duty probe lengths longer than 6", change "-0600" in model number to the required length (example: 12" = "-1200", 9¼" = "-0925") and add $2.50 per inch to the price (up to 24 inches).For cables longer than 120", change "120" in model number to the required length in inches and add $1 per foot to the price. For probe lengths longer then 24 inches, please contact Customer Service.
Ordering Example: (1) TCS-TU-S-0300-D1-CB-120 Ungrounded Type, MYR725.00
Thermocouple Type select from:T
for Type TJ
for Type JK
for Type KE
for Type E
Probe Diameter select from:S
for Standard Duty 1/4 inchH
for Heavy Duty 3/8 to 3/16 inch stepped probe
Probe Length select from:0300
for 3 inch length0400
for 4 inch length0500
for 5 inch length0600
for 6 inch length
Sanitary Flange (Cap) Size select from:D1
for 1-1/2 inch Tri-Grip Flange (standard) B1
for 3/4 inch 16AMP Tri-Grip Flange E1
for 2 inch 16AMP Tri-Grip Flange F1
for 2-1/2 inch 16AMP Tri-Grip Flange G1
for 3 inch 16AMP Tri-Grip Flange H1
for 4 inch 16AMP Tri-Grip Flange
Lead Wire Cable Length select from:120
for 120 inch/10 ft (standard)144
for 144 inch/12 ft180
for 180 inch/15 ft240
for 240 inch/20 ft
Note: All combinations may not be valid, check spec sheet for valid part numbers.