The F2020 thin film RTD element is a 2.0mm x 2.0mm size.
OMEGAFILM platinum thin film RTD
elements are manufactured using
materials and processes similar
to those employed in the
manufacture of integrated circuits.
This results in a rugged, reliable
sensing element that can be
produced in a wide range of sizes,
resistances, and accuracies to meet
even the most demanding of
OMEGAFILM RTDs conform to
the internationally accepted
requirements of IEC60751, which
defines the resistance vs.
temperature characteristics of the
sensors, their base resistance at
0°C (32°F), and their accuracy
(see below). RTDs conforming to
IEC751 have a temperature
coefficient of resistance (also
known as Alpha) of 0.00385Ohms/Ohms/°C
between 0 and 100°C.
As a result of conforming to an
internationally recognized standard
such as IEC751, OMEGAFILM
RTD elements can be used as-is
worldwide with a multitude of
controllers and instruments
designed to function within these
requirements. Elements are referred to as pt100, pt500 or pt1000 Ohm configurations
Tolerance of resistance at 0°C (Ω)
±(0.1 + 0.0017ItI)
0 to 150°C
±(0.15 + 0.002ItI)
-30 to 300°C
±(0.3 + 0.005ItI)
-50 to 500°C
OMEGAFILM RTDs are available in
flat, round, and specialty shapes for
maximum flexibility. They are also
available in resistances at 0°C that
include 100, 200, 500, and 1000 ohms, depending on the element
style (the resistances available for
each style will be shown on their
Note on Assembling Omega "F" Series RTD Elements to Extension Wires:
These RTD elements are made with platinum coated nickel lead wires. Since platinum does not easily wet with most soft solders, we advise that they be spot welded or silver soldered to extension wires when required.
† All prices on this site are shown in Philippine Pesos.