PHP8,690.00
PR-25CUA-3-100-A-1/4-0600-M12
-
Element Located Inside Copper Alloy Tip for Improved Thermal Response
-
316L Stainless Steel Sheath and Housing
-
Can be Used for Measuring Bearing Temperature, in Thermowells, and As-Is
-
Operating Temperature Sensor: -50 to 250ºC (-58 to 482ºF)
Connector: -50 to 85°C (-58 to 185°F)
-
Vibration Tested to ASTM-E1137: 3Gs from 5 to 500 Hz
-
Response Time (Typical): 4 Seconds for 63.2%, 3.25 Seconds for 50%,
7.5 Seconds for 90% [Water at 0.91 m (3')/second]
-
PR-25CUA Non-Threaded Version can be Used With Our M12-Handle for Hand-Held Use
RTD (PT100) Probes, Elements and Assemblies - View related products
† All prices on this site are shown in Philippine Pesos.
Note: Standard; For lengths other than 6", change “-0600” in model number to required length and add $1 per inch greater than 6", (example: 18" = 1800).
For 1000 Ω RTD elements change “-100” to “-1000” in model number.
For Class B Element, change the “-A” to “-B”.
For 3/16" probe diameters, change “-1/4” in model number to “-3/16”, no additional cost.
Metric; For lengths other than 150 mm, change “-M150” in model number to required length and add $1 per inch per 25mm greater than 150 mm.
For 4.5 mm diameters, change “-M6” in model number to “-M4.5”, no additional cost.
Ordering Example: (1) PR-25CUA-3-100-A-1/4-0600-M12 Straight sheath, Class A, 100 Ohm, 1/4, PHP8,690.00
Option Descriptions:
(1)
Mounting select from:A for Straight sheath
B for Straight sheath with 1/2 NPT mounting
C for Straight sheath with 3/8 NPT mounting
D for Straight sheath with 1/4 NPT mounting
E for Straight sheath with M8x1 mounting thread
F for Straight sheath with M10x1 mounting thread
G for Straight sheath with G1/2 mounting thread
H for Straight sheath with G1/4 mounting thread
(2)
RTD select from:100 for 100 OHM
1000 for 1000 OHM
(3)
Class Element select from:A for Class A Element
B for Class B Element
(4)
Diameter select from:1/4 for 1/4 in
3/16 for 3/16 in
M6 for 6 mm
M4.5 for 4.5 mm
(5)
Length select from:0600 for 6 inch Length
M150 for 150 mm Length
Note: All combinations may not be valid, check spec sheet for valid part numbers.