The OMEGA™ FSW-160 is the
newest heavy-duty line of flow
switches. The switch is used to
signal, start, or stop electronically
operated equipment when flow or
no-flow conditions occur.
Omega’s elastomeric sealing
system is superior to the metal
bellows that are subject to metal
fatigue and corrosion. This seal
system has been field-proven for
over a decade. The FSW-160 can
be used in pipes 1 inch and larger,
with set-points as low as
4 GPM (15.2 LPM) to over
500 GPM (1893 LPM) in larger
pipe sizes. The FSW160 uses a
15A SPDT micro switch that can
control a 1/2 horsepower motor.
Specifications Hysteresis (? Flow Rate to Activate/
10% at upper end of flow range
30% at lower end of flow range Differential Pressure Drops
Across Unit Under Normal
1 to 3" pipe, less than 1 psi
4 to 48" pipe, negligible Working Line Pressure:
200 psig maximum [proof tested to
1200 psig at 21°C (70°F)] Working Temperature: 121°C (250°F)
maximum continuous Wetted Materials: Body and Lid: Brass Shaft: 304 stainless steel Paddle: 316 stainless steel Seal: EPDM Electrical Switch Characteristics
SPDT 15 A, 1/2 hp at 125 or 250 Vac
0.5 A at 125 Vdc (tungsten lamp)
0.25 A @ 250 Vdc (tungsten lamp)
† All prices on this site are shown in Singapore Dollars. Note: Comes complete with operator’s manual.
We noticed you are from the US. Visit your local site for regional offers and live support.