Industrial Duty Rotary Encoder with Single Channel or Quadrature Output - Can be Converted to Industrial Length Sensor

ZB SERIES Rotary Encoder

Industrial Duty Rotary Encoder, Length Sensor

See All Models Below

PLACE ORDER

Single Channel or Quadrature Output Models
Current Sinking, 250 mA Maximum
4.75 to 28 Vdc Supply Voltage
Up to 1000 PPR for High Resolution Precision Counting or Speed Measurement
6000 RPM Shaft Speed
Conversion Bracket for Length Sensor Measurement

Sensors and Transducers - View related products

Description

AU-ZBG10002 encoders with the length sensor conversion kits are used for precise speed control in Omega's manufacturing process for metal sheath thermocouple wire.

The ZB Series shaft encoders are general duty industrial rotary pulse generators. The AU-ZBG models are for single channel sensing for counting, one directional measuring or speed applications. The AU-ZBH models are for quadrature applications, allowing for counting up and down along with speed and direction measurements. A conversion bracket is available to easily convert this encoder into a length measuring sensor. They can be direct-coupled to a machine shaft by means of a flexible-bellows, spring, or rubber sleeve type coupling that allows for axial and radial misalignment. They can also be coupled with light instrument timing-belts. Timing-belt drives also allow convenient gear-up or geardown speed ratio changes that can be useful for obtaining non-standard PPR rates.

Specifications
Supply Voltage: 4.75 to 28 Vdc
Output: Current sinking, 250 mA maximum current per output
Maximum Frequency: 1000 ppr, 20 KHz
Connections: 6-pin MS style connector (male) (MIL-C-5015)

See SPECS above for full specifications and additional information on length sensor conversion kit.

Place Order(Specify Model Number)

Part Number/Desc.

Qty

Description

AU-ZBG01002

Consult Sales

Availability:

Single channel shaft encoder, 100 ppr

AU-ZBG10002

Consult Sales

Availability:

Single channel shaft encoder, 1000 ppr

AU-ZBH01002

Consult Sales

Availability:

Quadrature encoder shaft encoder, 100 ppr

AU-ZBH10002

Consult Sales

Availability:

Quadrature encoder shaft encoder, 1000 ppr

22 AWG shielded cables, 4-conductor with drain

CCARPG01

Consult Sales

Availability:

10 foot cable with 6-pin MS connector

CCARPG25

SGD239.00

Availability: 1 week

25 foot cable with 6-pin MS connector

CCARPG50

SGD281.00

Availability: 1 week

50 foot cable with 6-pin MS connector

Flexible Shaft Couplings

AU-RPGFC002

Consult Sales

Availability:

Shaft diameter 0.250 - 0.375", 28mm long & 20mm diameter

AU-RPGFC003

SGD141.00

Availability: 1 week

Shaft diameter 0.375 - 0.375", 28mm long & 20mm diameter

AU-RPGFC004

Consult Sales

Availability:

Shaft diameter 0.375 - 0.500", 40mm long & 32mm diameter

AU-RPGFC005

Consult Sales

Availability:

Shaft diameter 0.375 - 6mm, 22mm long & 16mm diameter

Accessories

AU-LSCB1000

Consult Sales

Availability:

Length sensor conversion bracket

AU-LSAHC001

Consult Sales

Availability:

Hing clamp assembly for length sensor conversion bracket

AU-WF1000F

Consult Sales

Availability:

1 foot circumfrence urethane measuring wheel

AU-WF1000K

SGD126.00

Availability: 1 week

1 foot circumfrence knurled measuring wheel

AU-WM0400F

Consult Sales

Availability:

4/10th meter circumfrence urethane measuring wheel

AU-WM0400K

Consult Sales

Availability:

4/10th meter circumfrence knurled measuring wheel

† All prices on this site are shown in Singapore Dollars.
Note: Note: NPN Transistor outputs have 1.5 KÙ load resistors returned to supply for internal feed back purposes. This does not interfere with the ability to use these outputs as conventional “Open-Collector” outputs as long as the supply voltage for the ZB is supplied by the indicator or control receiving its output signal. The ZB’s internal load resistor also allows the output to be used as a current source, however, load current must be limited to 1 mA maximum