Flow Transmitter with rate/total display - relay outputs available - Discontinued

FP90 Series

See All Models Below

PLACE ORDER

Permanent and Resettable Totalizers
Scalable Outputs
Relay Options
Mounting Versatility
Simulate Function
2 x 16 Character Dot Matrix LCD
Chemical Resistant Enclosure and Self-Healing Window
Large Pushbuttons
Clearly Marked Terminal Labels Application
Flow Control and Monitoring
Filtration or Softener Regeneration
Effluent Totalization
Pump Protection
Feed Pump Pulsing
Water Distribution
Leak Detection

Description

The FP90 series has been discontinued. Please see the DPU91 as a possible alternative or contact our {your dept.} Engineering department.

The FP90 Series Flow Transmitter is an advanced solution that converts the signal from many flow sensors into a 4 to 20 mA signal for long distance transmission. Configuration flexibility is maximized with two optional relays for process control, two packaging options for integral/pipe mount or panel installation, and scalability for virtually any flow range or engineering unit. State-of-the-art electronic design ensures long-term reliability, signal stability, and simple user setup and operation. The FP90 can be integrally mounted to FP8500 series paddlewheel sensors utilizing an mounting kit. The FP90 can be remotely used with the OMEGA ® FP-5100, FP-5200, FP-5300, FP-5060, FP-2541, FP-5600, FP-3-1500 or FP-6000 flow sensors and a FP90UM mounting kit. The FP90-XP units are designed to be panel mounted. The three front keys control all programming and scaling of the FP90-there are not pots to tweak or internal adjustments to make. Simply enter the K-factor and the FP90 displays rate with field-adjustable decimal point, mA output value, total (field selectable for resettable or non-resettable operation) and the date of the last reprogramming. The 8-digit alphanumeric LCD shows every program step in clear language, allowing display in any engineering units and timebase in seconds, minutes, hours or days. A special pushbutton sequence permits entry into the programming, thus providing security against unauthorized reprogramming.

SPECIFICATIONS
Compatibility: Flow Sensors with frequency outputs
Accuracy: ±0.5% of reading @ 25°C
Enclosure<br> Rating: NEMA 4X (IP65) front
Case: PBT
Window: Polyurethane coated polycarbonate
Keypad: Sealed 4-key silicone rubber
Weight: Approx. 325 g (12 oz)
Display: Alphanumeric 2 x 16 LCD
Update Rate: 1 second
Contrast: User selected, 5 levels
Environmental
Operating Temperature: -10 to 70°C (14 to 158°F)
Storage Temperature: -15 to 80°C (5 to 176°F)
Relative Humidity: 0 to 95%, non-condensing
Electrical
Sensor Input:
Range: 0.5 to 1500 Hz
Sensor Power:
2-Wire: 1.5 mA @ 5 Vdc ±1%
3 or 4 Wire: 20 mA @ 5 Vdc ±1%
Optically isolated from current loop; short circuit protected
Current Output: 4 to 20 mA, isolated, fully adjustable and reversible
Power: 12 to 24 Vdc ±10%, regulated
Max Loop Impedance: 50 Ω max @ 12 V, 325 Ω max @ 18 V, 600 &Omega max @ 24 V
Update Rate: 100 ms
Accuracy: ±0.03 mA
Relay Output: Mechanical SPDT
Contacts: Hi, Lo, Pulse, Off
Maximum Voltage Rating: 5 A @ 30 Vdc, 5 A @ 250 Vac, resistive load
Hysteresis: User adjustable; max 300 pulses/min
Open-Collector Output: Hi, Lo, Pulse, Off Open-collector, optically isolated, 50 mA max, sink, 30 Vdc max pull-up voltage. Max 300 pulses/min

For complete product specifications see the Related Links section at the bottom of this page.

(Specify Model Number)

What Other People Bought: When you see this icon, click on it to expand a list of products that other people have bought when they purchased this model.

Part Number/Desc.

Qty

Description

Flow Transmitters

FP90-3

Consult Sales

Availability:

Field mount for 1 or 2 inputs with 4-20mA output for input 1, 2 or differential

FP90-3P

Consult Sales

Availability:

Panel mount transmitter for 1 or 2 inputs with 4-20mA output for input 1, 2 or differential

Flow Sensors for Integral Mounting (Requires FP90IM)

FP8501

Consult Sales

Availability:

1/2 " to 4" pipe, polypropylene body/titanium shaft, Min Flow 1 FPS

FP8502

Consult Sales

Availability:

5" to 8" pipe, polypropylene body/titanium shaft, Min Flow 1 FPS

Low Flow Sensors (0.3 fps min) for Integral Mounting (Requires FP90IM)

FP8501A

THB18,712.76

Availability: 1 week

1/2 " to 4" pipe, polypropylene body/titanium shaft, Min Flow 0.3 FPS

FP8502A

Consult Sales

Availability:

5" to 8" pipe, polypropylene body/titanium shaft, Min Flow 0.3 FPS

Remote Mount Paddlewheel Sensors

FP-5300

Consult Sales

Availability:

1/2 " to 4" pipe, polypropylene body/titanium shaft, Min Flow 1 FPS

FP-5600

Consult Sales

Availability:

1/2 " to 4" pipe, polypropylene body/titanium shaft, Min Flow 0.3 FPS

Accessories

FP90IM

Consult Sales

Availability:

Integral mounting kit for mounting on top of FP85XX sensors

FP90UM

THB4,165.38

Availability: 1 week

Universal mounting kit for remote wall or pipe mount

FP90-4X

Consult Sales

Availability:

NEMA 4X cover (panel mount)

FP90RC

THB1,430.00

Availability: 1 week

RC filter (for relay use)

U24Y175

Consult Sales

Availability:

24 Vdc1 175 mA Power Supply

Popular Sensor Installation fittings

FP-5307M

Consult Sales

Availability:

3/4" molded PVC

FP-5307CU

Consult Sales

Availability:

3/4" Copper

FP-5320M

THB14,795.03

Availability: 1 week

2" molded PVC

FP-5320GI

Consult Sales

Availability:

2" NPT Galvanized Iron

FP-5340CS

Consult Sales

Availability:

4" Carbon Steel Weldolet

† All prices on this site are shown in Thai Baht.
Note: * Field mount transmitters require FP90IM internal mounting kit for FP8500 or FP8500A sensor or FP90UM for all other compatible sensors.

Fittings are also required, see FP series fittings.

FP90 comes complete with operator's manual.

FP90-XP comes complete with mounting bracket, panel gasket, and operator's manual.

Ordering Example: (1) U24Y175 24 Vdc, 175 mA Power Supply, THB9,278.48