This product is discontinued and is replaced by
The FTB2000 series Hall-effect turbine flowrate sensor is ideal for OEM applications involving low flow liquid monitoring. The low cost, coupled with 1 /2 % repeatability, makes it an ideal candidate for replacing dispensing timer systems. Unlike existing timing systems, turbine technology is not influenced by changes in system pressure caused by aging filters. The sensor’s standard power and output specifications make it easy to retrofit to existing controllers.
Body: Nylon 12
Turbine: Nylon 12 Composite
Bearings: PTFE/15% Graphite
Accuracy: ±3% of reading
Repeatability: 0.5% of full scale
Operating Pressure: 200 psig
Operating Temperature: -20 to 100°C (-4 to 212°F )
Viscosity: 32 to 81 SSU (1.8 to 16 centistokes)
Filter: <50 microns Input
Power: 5 to 24 Vdc @ 8 mA
Output: NPN Sinking Open Collector @ 50 mA Maximum (1 to 2.2 K Ohm Pull-Up Resistor Required) (Hz Output)
Electrical Connection: Spade Terminals 2.8/6.3 x 0.8 mm (0.110/.248 x 0.031")standard
Cable 1m (3') on optional "-C" versions
Inlet/Outlet Ports: 3 /8 " NPT Male
† All prices on this site are shown in Thai Baht.
Note: Comes complete with operator's manual.
Ordering Example: (1) FTB173941 mating connector and 10 feet of cable, THB1,915.00