Cart  |  Contact  |  Help  | 
Toll-Free in Thailand: 001 800 441 0237
International+65 6415 5353

Clean Water Immersion Heater 1¼" NPT Fitting

MT-1 Series

Clean Water Immersion Heaters | MT-1 Series

Clean Water Immersion Heaters

THB8,700.00 MT-112A/240V

RoHS
  • 1¼" NPT Brass Screw Plug
  • 120 V and 240V, 1 Phase
  • General Purpose Models NEMA-1 Rated and UL Listed
  • Copper Sheath, Ideal for Clean Water Applications
Immersion Heaters - View related products

Description

The MT-1 series immersion heater is ideally suited for clean water requirements. Models are available with a general purpose terminal enclosure1 or a rugged moisture resistant explosion resistant terminal enclosure.

Please Note: This immersion heater should be used with an approved temperature control device to assure safe operation. See Section P for our complete selection of process controllers.

CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warning.



MT-1 Series
E1 General Purpose Encl.1
Model No.
E2 Explos. Res./ Moist Res Encl.2
Model No.
kW Phase W/in2 No.
Elem.
Dim. B
in (cm)
MT-160A/*MT-160E2/*0.615316 1/8 (16)
MT-175A/*MT-175E2/*0.7516516 1/8 (16)
MT-110A/*MT-110E2/*118616 1/8 (16)
MT-110-3A/*MT-110-3E2/*114326 1/8 (16)
MT-112A/*MT-112E2/*1.215326 1/8 (16)
MT-115A/*MT-115E2/*1.516526 1/8 (16)
MT-120A/*MT-120E2/*218626 1/8 (16)
/* Designate voltage, insert 120 for 120 VAC or 240 for 240 VAC. Higher wattages available - contact OMEGALUX.
1. Heaters with General Purpose and Moisture Resistant Enclosures are UL Listed and CSA Certified.
2. Heaters with Explosion Resistant Enclosures are CSA NRTL/C certified and are not intended for use in hazardous areas.
(Specify Model Number)
Part Number/Desc.
Qty
RoHS
Description
Quick Ship
MT-112A/240V
THB8,700.00
Availability: 5 weeks
RoHS compliant
1.2 kW heater powered by 240 VAC and NEMA-1 general purpose enclosure
All prices on this site are shown in Thai Baht.

Option Descriptions:


(1) kW select from:
60 for 0.6 kW
75 for 0.75 kW
10 for 1 kW
10-3 for 1 kW (MT-110-3A & MT-110-3E2 only)
12 for 1.2 kW
15 for 1.5 kW
20 for 2 kW

(2) Enclosure select from:
A for General Purpose Enclosure
E2 for E2 Moisture Tight Explosion Resistant Enclosure

(3) Voltage select from:
120V for 120 Vac
240V for 240 Vac
Note: All combinations may not be valid, check spec sheet for valid part numbers.