Sensors and Transducers - View related products
M12 Connectors for Easy Assembly, No Tools Required. An M12 Extension Cable is Required for Installation.
Spring Loaded RTD Probes for Use in Thermowells, Insures Proper Tip Contact with Thermowell and Maximum Performance
4-Wire Class A PT100 RTDs, Can Be Used in Any 2, 3 or 4-Wire Application for Maximum Flexibility
Fits All Standard 0.260" Bore Thermowells (Note: Thermowell Not Included)
Probe Length = Thermowell Stem Length for Easy Selection (See Figure Below)
Adjustable Self Gripping Spring Allows For Use in Shorter Thermowells
Can Be Combined With a Selection of Programmable and Fixed Range Transmitters
† All prices on this site are shown in Taiwan Dollars.
Note: For the alternate wiring arriangement (see Wiring Figure Above), change "-1" at the end of the model number to "-2" at the same price. For a probe length not listed up to 24", change the stem length in the model number to the required stem length (example: 1250 = 12-1/2") and use the price from the next longer sensor.
Ordering Example: (1) PR-21SL-3-100-A-0600-M12-1 PT100 RTD with M12 Plug Connection, With Spring Loading Fitting to Fit a Thermowell with a Stem Length of 6 Inches (Thermowell not included)., TWD3,680 plus (1) PR-21SL-3-100-A-1200-M12-1 PT100 RTD with M12 Plug Connection, With Spring Loading Fitting to Fit a Thermowell with a Stem Length of 12 Inches (Thermowell not included)., TWD3,910, TWD3,680 + 3,910 = TWD7,590
Length select from:-0250
for 2 1/2in. Stem Length-0400
for 4in. Stem Length-0600
for 6in. Stem Length-0900
for 9in. Stem Length-1200
for 12in. Stem Length-1500
for 15in. Stem Length-1800
for 18in. Stem Length-2400
for 24in. Stem Length
Wiring Orientation select from:-1
for Standard Wiring (See Diagram)-2
for Optional Wiring (See Diagram)
Note: All combinations may not be valid, check spec sheet for valid part numbers.