Cart  |  Contact  |  Help  |  seainfo@dwyeromega.com  | 
Toll-Free in Taiwan: 0809 090 375
International+65 6415 5353

Vibration Resistant and Bendable RTD (Pt100) Probes with M12 Connector and Mounting Threads (Fractional Sizes)

PR-26 Series

Vibration Resistant RTD Probe with M12 Connector for Process Control and Test and Measurement Applications | PR-26 Series

TWD5,885 PR-26A-3-100-A-1/4-0600-M12-1

  • Operating Temperature Range: -50 to 500°C (-58 to 932°F) Sensing End, -50 to 250°C (-58 to 482°F) at Connector
  • All Welded 316L Stainless Steel Housing and Probe
  • Available With or Without Mounting Thread (1/4, 3/8 and 1/2 NPT Mounting Threads Available)
  • 1/4" Diameter Standard, 2" Minimum Length
  • Pt100 Class A Platinum RTD Standard, Pt1000 Platinum RTD Also Available (per IEC60751)
  • 4 Wire Design Works With Any 2, 3 or 4-Wire Measurement System
  • Integral 4-Pin M12 Connector for Easy Connection
  • Bendable Probes (After the First 2" of Probe Tip) Using a Minimum Suggested Bend Radius of 2x the Probe Diameter
  • Vibration Tested to MIL-STD-202G, Method 204D, Test Condition A, 10gs from 10 to 500Hz (6" Long or shorter)
RTD (PT100)  Probes, Elements and Assemblies - View related products

Description

Note: These Sensors Require an M12 Extension Cable to Connect the Sensor To Your Instrumentation. A Partial List Of Our M12 Extension Cables is Included in the Ordering Table Below.

Omega's RTD sensors with M12 connections are designed to provide for easy and efficient installation or removal of these sensors for periodic calibration, troubleshooting or replacement. Gone are the days of having to pull extension cables from cable trays in order to calibrate or replace the sensor, now you simply disconnect the sensor from the extension cable saving cost and downtime. The Omega PR-26 RTD is a flexible and robust temperature sensor made with 316L Stainless Steel housings and sheaths for strength and corrosion resistance. The probe stem is made from mineral insulated cable which produces a sensor that can be used to 500°C, and can be bent (except for the first 2 inches of the tip) to fit your application.

These sensors include a 4-pin, M12 A-Coded plug connector for easy assembly to patch cables or extension cables. Unlike other M12 enabled sensors that have a maximum rating of 85 or 90°C on their connections, the PR-26 RTD can really take the heat with a connector rating of 250°C. Combine this sensor with one of our proprietary M12CM-T24SSPC high temperature extension cables and you have a probe/cable combination that is unmatched in the industry.

For use in thermowells, the PR-26SL Spring-Loaded version of this sensor is the preferred solution. The PR-26SL design includes a non-threaded PR-26A style probe with a self-gripping spring and 1/2NPT threaded fitting to insure that the probe will contact the bottom of the thermowell bore without damaging the sensor. This insures that the sensor length will always be a perfect fit for your thermowell. See the PR-26SL page for additional information.

The mounting thread options on the PR-26 Series sensors allow them to be used in a wide variety of applications, including:
  • Stand alone immersion sensors.
  • Installed directly into your product or process using an existing metric threaded port.
  • When combined with our M12-Handle, non-threaded "A" style PR-26 probes can be used in hand-held sensing applications.
  • Other applications using a variety of available compression fittings or other accessories.


  • These RTD sensors can be used in any 2, 3 or 4-wire application by selecting one of the two available wiring arrangements (see the wiring diagrams below) and using only those wires needed for your measurement connection. This allows for simplified, trouble free installation with any existing application. This also allows the PR-26 series sensor to be used for a wide variety of replacement applications since it can be connected as-is with just about any measurement or control equipment available when combined with a 4-pin female M12 connector extension or patch cable.

     
  • Standard Mounting Threads: 1/2NPT, 3/8NPT, 1/4NPT and Non-Threaded
  • Standard Probe Diameters: 1/4" and 1/8"
  • Standard Probe Length: 6" (2" length mimimum)
  • Sensor: Pt100 (100 Ohms at 0°C, .00385 TCR (alpha)) Standard, Pt1000 and Other Options Available
  • Accuracy: Class A Standard (per IEC 60751), Others Available Upon Request
  • Temperature Range: -50 to 500°C Except for the Connector Which is 250°C Max
  • Insulation Resistance: 100 Megohms Minimum at 100VDC at Room Ambient
  • Response Time: Appoximately 8.5 Seconds (63.2% Response) When Immersed in Water Flowing at 3 feet/sec
  • Vibration Resistance: 10g's from 10 to 500Hz per MIL-STD-202G, Method 204D, Test Condition A (6" long or shorter)

  • (Specify Model Number)

    What Other People Bought: When you see this icon, click on it to expand a list of products that other people have bought when they purchased this model.

    Part Number/Desc.
    Qty
    Description
      
    PR-26A-3-100-A-1/4-0600-M12-1
    TWD5,885
    Availability: 8 weeks
     
    Element Pt100, Class A, Length (inch)6.00, Mounting Thread None
      
    PR-26A-3-100-A-1/4-1200-M12-1
    TWD6,620
    Availability: 1 week
     
    Element Pt100, Class A, Length (inch)12.00, Mounting Thread None
      
    PR-26B-3-100-A-1/4-0600-M12-1
    TWD6,218
    Availability: 1 week
     
    Element Pt100, Class A, Length (inch) 6.00, Length (inch)1⁄2 NPT
      
    PR-26B-3-100-A-1/4-1200-M12-1
    TWD6,618
    Availability: 8 weeks
     
    Element Pt100, Class A, Length (inch) 12.00, Length (inch)1⁄2 NPT
      
    PR-26C-3-100-A-1/4-0600-M12-1
    TWD6,220
    Availability: 8 weeks
     
    Element Pt100, Class A, Length (inch) 6.00, Length (inch) 3⁄8 NPT
      
    PR-26C-3-100-A-1/4-1200-M12-1
    TWD6,490
    Availability: 1 week
     
    Element Pt100, Class A, Length (inch) 12.00, Length (inch) 3⁄8 NPT
      
    PR-26D-3-100-A-1/4-0600-M12-1
    TWD6,220
    Availability: 8 weeks
     
    Element Pt100, Class A, Length (inch) 6.00, Length (inch) 1⁄4 NPT
      
    PR-26D-3-100-A-1/4-1200-M12-1
    TWD6,490
    Availability: 8 weeks
     
    Element Pt100, Class A, Length (inch) 12.00, Length (inch) 1⁄4 NPT
      
    PR-26B-3-1000-A-1/4-0600-M12-1
    TWD6,220
    Availability: 8 weeks
     
    Element Pt1000, Class A, Length (inch) 6.00, Length (inch) 1⁄2 NPT
    M12 Extension Cables
    M12CM-T24SSPC-SF-2
    M12CM-T24SSPC-SF-2
    TWD2,399
    Availability: 5 weeks
     
    2 Meter Long, LCP Overmolded Straight Connector with 4-Conductor FEP Cable (200°C Max)
      
    M12CM-T24SSPC-SF-5
    TWD3,094
    Availability: 1 week
     
    5 Meter Long, LCP Overmolded Straight Connector with 4-Conductor FEP Cable (200°C Max)
      
    M12CM-T24SSPC-SF-15
    TWD4,950
    Availability: 5 weeks
     
    15 Meter Long, LCP Overmolded Straight Connector with 4-Conductor FEP Cable (200°C Max)
      
    M12CM-T24SSPC-RF-5
    TWD2,929
    Availability: 1 week
     
    5 Meter Long, LCP Overmolded Right Angled Connector with 4-Conductor FEP Cable (200°C Max)
      
    M12CM-T24SSPC-RF-15
    TWD4,950
    Availability: 5 weeks
     
    15 Meter Long, LCP Overmolded Right Angled Connector with 4-Conductor FEP Cable (200°C Max)
    M12C-PVC-4-S-F-5
    M12C-PVC-4-S-F-5
    TWD834
    Availability: 1 week
     
    PVC Extension Cable, 5 Meters Long with Straight Female M12 Connector One End
    M12C-PUR-4-S-F-5
    M12C-PUR-4-S-F-5
    TWD913
    Availability: 2 weeks
     
    Polyurethane Extension Cable, 5 Meters Long with Straight Female M12 Connector One End
    M12C-SIL-4-S-F-3
    M12C-SIL-4-S-F-3
    TWD690
    Availability: 11 weeks
     
    Silicone Extension Cable, 3 Meters Long with Straight Female M12 Connector One End
      
    M12C-SIL-4-S-F-5
    TWD931
    Availability: 6 weeks
     
    Silicone Extension Cable, 5 Meters Long with Straight Female M12 Connector One End
    Accessories
      
    TX-M12-RTD-C
    Consult Sales  
    Availability: 
     
     
    Miniature Programmable Temperature Transmitter (4 to 20mA) with M12 Connections (Wiring Option 2 Probes)
    TX-M12-RTD-C-1
    TX-M12-RTD-C-1
    Consult Sales  
    Availability: 
     
     
    Miniature Programmable Temperature Transmitter (4 to 20mA) with M12 Connections (Wiring Option 1 Probes)
      
    TX-M12-RTD-V
    Consult Sales  
    Availability: 
     
     
    Miniature Programmable Temperature Transmitter (0 to 10VDC) with M12 Connections (Wiring Option 2 Probes)
      
    TX-M12-RTD-V-1
    Consult Sales  
    Availability: 
     
     
    Miniature Programmable Temperature Transmitter (0 to 10VDC) with M12 Connections (Wiring Option 1 Probes)
      
    M12TX-Pt100
    TWD4,568
    Availability: 1 week
     
    Over Molded Programmable Temperature Transmitter with 4 to 20mA output and M12 Connections (for use with wiring option 2 probes only)
      
    SPRTX-SS1-M12-1
    TWD5,936
    Availability: 6 weeks
     
    4-20 milliamp Transmitter in Mating M12 Connector with Extension Cable, Range -99 to 208°C (-146 to 406F°F) for use with -1 style RTDs
      
    TX94A-1-SS-M12F-1
    Consult Sales  
    Availability: 
     
     
    4-20mA Transmitter in SST Housing, Range -40 to 49°C (-40 to 120°F) for use with -1 style RTD wiring
      
    TX94A-3-SS-M12F-1
    Consult Sales  
    Availability: 
     
     
    4-20mA Transmitter in SST Housing, Range -18 to 149°C (0 to 300°F) for use with -1 style RTD wiring
      
    TX94A-4-SS-M12F-1
    TWD10,370
    Availability: 15 weeks
     
    4-20mA Transmitter in SST Housing, Range -18 to 260°C (0 to 500°F) for use with -1 style RTD wiring
      
    M12-HANDLE-A
    TWD3,735
    Availability: 4 weeks
     
    Handle Accessory to Modify a PR-26A into a Hand-Held Probe
    All prices on this site are shown in Taiwan Dollars.
    Note: For lengths other than 6", change “0600” in model number to required length and add $1 per inch or 25mm to the price. greater than 6" (example: 9" = 0900, 41/2" = 0450).
    Ordering Example: (1) PR-26A-3-100-A-1/4-0600-M12-1 Element Pt100, Class A, Length (inch)6.00, Mounting Thread None, TWD5,885

    Option Descriptions:


    (1) Mounting Thread select from:
    A for None
    B for 1/2 NPT
    C for 3/8 NPT
    D for 1/4 NPT

    (2) Element select from:
    100 for Pt100
    1000 for Pt1000

    (3) Accuracy select from:
    A for Class A
    B for Class B

    (4) Sheath Diameter select from:
    1/4 for 1/4" Diameter
    1/8 for 1/8" Diameter

    (5) Length (Custom lengths available) select from:
    0600 for 6 Inch
    1200 for 12 Inch

    (6) Wiring Option select from:
    1 for Wiring Option 1
    2 for Wiring Option 2
    Note: All combinations may not be valid, check spec sheet for valid part numbers.
    We noticed you are from the US. Visit your local site for regional offers and live support.