Cart  |  Contact  |  Help  | 
Toll-Free in Taiwan: 0809 090 375
International+65 6415 5353

ACC102

acceleration sensor | ACC102

acceleration sensor

See All Models Below

  • Ideal for Harsh Environments
  • Hermetically Sealed
  • Superior Low Noise Floor for High Resolution
  • Rugged Strain Relief on Integral Cable
  • Fast Turn-on Time (1 Sec)
  • High EMI Noise Rejection
  • 100 mV/g Output
Dynamic Measurement - View related products

Description

The ACC102A accelerometer uses a shear mode design for high performance. It has a rugged stainless steel inner structure covered by a molded polymer. This construction makes the ACC102 impervious to harsh environments, such as alkaline coolants, hot oil and water sprays, resulting in long, reliable service. Additional features include high shock protection (to protect from dropping or mishandling), cross wire protection (protects against miswiring), and up to 1000 volt static discharge protection. The ACC102 has a high 100 mV/g output and measures across wide frequency and acceleration ranges. A low impedance cable allows for runs up to 1000 ft. The ACC102 exhibits the low noise floor and high amplitude linearity you’d expect in more expensive units.

SPECIFICATIONS
Excitation: 2 mA @ 24 to 30 Vdc, constant current (18 V supply can be used but will limit amplitude range)
Rated Output: 100 mV/g nominal at 100 Hz
Frequency Range: 3 Hz to 5 kHz (up to ±5% rated output shift)
Amplitude Range: ±40 g peak w/ACC-PS1, ±75 g peak w/ACC-PS2, ACC-PS3
Amplitude Linearity: 1% up to 65 g peak
Temperature Range: -40 to 82°C (-40 to 180°F)
Temperature Sensitivity Effect:
-54 to 38°C (-65 to 100°F): ≤5% FS;
38 to 121°C (100 to 250°F): ≤8% FS
Thermal Shock: 1.2 g/°C
Transverse Sensitivity: 7% of axial max
Maximum g Without Damage: 5000 g peak
Maximum g Without Clipping: 75 g peak
Mounted Resonance Frequency: >23 kHz nominal
Output Impedance: 200 Ω nominal
Bias Voltage: 13 V nominal
Base Strain: 0.04 g/microstrain nominal
Noise Floor (Wideband): 0.0003 g (rms)
Weight: 50 g (1.8 oz) nominal (without cable)
Material:
   Inner Housing: 303 SS
   Outer Jacket: Non-conductive composite polymer
Dimensions: 2.16 H x 2.54 cm D (0.85 x 1.00")
Connector: 2.5 m (10') integral coaxial cable to BNCM
Mounting: 10-32 removable stud
Mounting Torque Max: 22 cm-kg (20 in-lb)
(Specify Model Number)

What Other People Bought: When you see this icon, click on it to expand a list of products that other people have bought when they purchased this model.

Part Number/Desc.
Qty
Description
ACC102A
ACC102A
Consult Sales  
Availability: 
 
 
Industrial accelerometer with 10 foot cable
ACC-PS1
ACC-PS1
Consult Sales  
Availability: 
 
 
9 volt battery powered accelerometer power supply
ACC-PS2
ACC-PS2
Consult Sales  
Availability: 
 
 
Rechargeable battery powered accelerometer power supply and amplifier
ACC-PS3
ACC-PS3
Consult Sales  
Availability: 
 
 
AC powered accelerometer power supply
ACC-CB4-15
ACC-CB4-15
TWD2,390
Availability: 1 week
 
15 foot coaxial cable (BNCM/BNCM)
ACC-CB5-2
ACC-CB5-2
TWD1,320
Availability: 8 weeks
 
2 foot coaxial cable (BNCM/banana plug)
ACC-CB6
ACC-CB6
TWD680
Availability: 1 week
 
7 inch coaxial cable (BNCM/pigtail)
All prices on this site are shown in Taiwan Dollars.
 
We noticed you are from the US. Visit your local site for regional offers and live support.