Cart  |  Contact  |  Help  | 
Toll-Free in Malaysia: 1800 88 3496
International+65 6415 5353

DLC101

IMPACT SENSOR, Dynamic Load Cell | DLC101

IMPACT SENSOR, Dynamic Load Cell

See All Models Below

RoHS
  • For High Frequency Tension/Compression Force Measurements
  • Ideal for Measuring Impact or Pulsating Forces
  • Frequency Range up to 25 kHz
  • Force Ranges up to 5000 lb
  • Calibration Certificate Supplied
  • Stainless Steel Impact Cap and Mounting Stud Provided
Dynamic Measurement - View related products

Description

OMEGA's DLC101 dynamic load cell is ideal for measuring force transients or dynamic force pulsations in impact or vibration applications. This load cell contains a thin piezoelectric crystal that generates an analog voltage signal in response to an applied dynamic force. The DLC101 has 2 threaded ends, enabling installation of threaded members such as mounting studs, impact caps, and machine elements. Its welded construction encloses and protects the crystals from the environment.

SPECIFICATIONS
Excitation: 2 mA nominal @ 18 to 30 Vdc, constant current
Rated Output: 5V nominal FS
Amplitude Linearity: ±1% FS (BSFL/0)
Resonant Frequency (@ No Load): 75 kHz
High Frequency Range: 25 kHz (approx. 1/3 of resonant frequency, no load)
Low Frequency Range (-3 dB): 0.08 Hz
Stiffness: 11.4 lb/min
Overload Recovery: 10 ms for 2x range
Maximum Shock/Vibration: 10,000/±5000 g (no load)
Temperature Range: -75 to 120°C (-100 to 250°F)
Temperature Sensitivity Effect: 0.03% FSPF
Output Impedance: 100 Ω
Bias Voltage: 10V nominal
Weight: 43 g (1.5 oz) nominal
Material: 17-4 PH SS housing (RC 44)
Diameter of Top Force-Sensitive Surface: 13 mm (0.50")
Mounting Holes: ¼-28 x 0.175" deep tapped hole
Connector: Internal side coaxial, 10-32 male termination; cable sold separately; order ACC-CB2-10

Model No. Measurement
Range Comp.
Measurement
Range Ten.
Discharge
Time Constant
Max
Comp.
Max
Tension
Noise Floor
(Wideband, RMS)
DLC101-10 0 to 10 0 to 10 50 s 200 lb 200 lb 0.00014 lb
DLC101-50 0 to 50 0 to 50 100 s 1000 lb 500 lb 0.0007 lb
DLC101-100 0 to 100 0 to 100 500 s 2000 lb 500 lb 0.0014 lb
DLC101-500 0 to 500 0 to 500 2000 s 10,000 lb 500 lb 0.007 lb
DLC101-1K 0 to 1000 0 to 500 2000 s 15,000 lb 500 lb 0.014 lb
DLC101-5K 0 to 5000 0 to 500 2000 s 15,000 lb 500 lb 0.07 lb
(Specify Model Number)

What Other People Bought: When you see this icon, click on it to expand a list of products that other people have bought when they purchased this model.

Part Number/Desc.
Qty
RoHS
Description
Quick Ship
DLC101-10
DLC101-10
Consult Sales  
Availability: 
 
RoHS compliant
Dynamic load cell with 10 lb range
Quick Ship
DLC101-50
DLC101-50
Consult Sales  
Availability: 
 
RoHS compliant
Dynamic load cell with 50 lb range
Quick Ship
DLC101-100
DLC101-100
Consult Sales  
Availability: 
 
RoHS compliant
Dynamic load cell with 100 lb range
Quick Ship
DLC101-500
DLC101-500
Consult Sales  
Availability: 
 
RoHS compliant
Dynamic load cell with 500 lb range
Quick Ship
DLC101-1K
DLC101-1K
Consult Sales  
Availability: 
 
RoHS compliant
Dynamic load cell with 1000 lb range
Quick Ship
DLC101-5K
DLC101-5K
Consult Sales  
Availability: 
 
RoHS compliant
Dynamic load cell with 5000 lb range
Power Supplies
Quick Ship
ACC-PS1
ACC-PS1
Consult Sales  
Availability: 
 
RoHS compliant
9 volt battery power supply (BNCF connections)
Quick Ship
ACC-PS2
ACC-PS2
Consult Sales  
Availability: 
 
RoHS compliancy undetermined
Recharge battery power supply (BNCF connections)
Quick Ship
ACC-PS3
ACC-PS3
Consult Sales  
Availability: 
 
RoHS compliancy undetermined
115 Vac power supply (BNCF connections)
Interface Cables
Quick Ship
ACC-CB4-15
ACC-CB4-15
MYR342.00
Availability: 1 week
RoHS compliancy undetermined
15 ft coaxial cable (BNCM/BNCM)
Quick Ship
ACC-CB5-2
ACC-CB5-2
MYR184.00
Availability: 8 weeks
RoHS compliancy undetermined
2 ft coaxial cable (BNCM/banana plugs)
Quick Ship
ACC-CB6
ACC-CB6
MYR97.00
Availability: 1 week
RoHS compliancy undetermined
7 in coaxial cable (BNCM/pigtail)
All prices on this site are shown in Malaysian Ringgit.
Note: A complete system is a dynamic load cell, a power supply, and two cables; one between the load cell and the power supply and one from the power supply to your data system.

Ordering Example:  (1) ACC-CB5-2 2 ft BNC to banana jack cable, MYR184.00