Cart  |  Contact  |  Help  |  seainfo@dwyeromega.com  | 
Toll-Free in Thailand: 001 800 441 0237
International+65 6415 5353

Programmable Stepper Drive with Integrated Power Supply

Si3540

Programmable Stepper Drive | Si3540

Programmable Stepper Drive

See All Models Below

CE
  • 3.5 A, 40 Vdc
  • 110/220 Vac Input, 50/60 Hz Switch Selectable
  • Microstepping 2000 to 50,800 Steps/Rev
  • Idle Current Reduction Software Selectable: 0, 25, 50, or 100%
  • Software Selectable Motor Current 0.2 to 3.5 A/Phase
  • Eight Optically Isolated Inputs 5 to 24 Vdc
  • Three Optically Isolated Outputs 12 to 24 Vdc, 100 mA max
  • One Optically Isolated Output 5V, Dedicated to Fault Out
  • Download, Store and Execute Programs Using Si Programmer (Free Download)
  • Mating Connectors Included
  • Sample Motion Programs Available by Request
Drives & Motors - View related products

Description

The Si3540 is a programmable step motor drive/indexer packaged in a rugged steel and aluminum enclosure. Integral power supply, heat sink, mounting brackets, switch covers and connectors are included with each Si3540. The Si3540 comes with all operating software necessary to create a complete step motor-based motion control solution.

The Si3540 includes Applied Motion Products' Windows-based Si Programmer™ software application for quick set up and ease of use. Si Programmer™ is ideal for stand-alone operation. For users with software development expertise, the Si3540 can also be used with Applied Motion's Si™ Command Language (SCL). SCL allows for control of an Si drive, like the Si3540, via serial commands sent from a host device such as a PC or PLC. This permits the user to perform a variety of motion, I/O, and system status tasks via a host serial device.

Multiple axis applications can be handled with the SiNet™ Hub Programmer software, which gives you the ability to control up to 4 "Si" or "i" drives, stepper and servo, from just one SiNet™ Hub 444. Not only can you sequence up to four motors, but a SiNet™ Hub 444 also has access to the inputs and outputs of all the drives connected to it, providing your program with up to 32 inputs and 12 outputs. In addition, the Hub 444 provides 4 digital inputs and 4 digital outputs of its own. You can also use Applied Motion's MMI-01 to interface the drives with the machine operator.

Factory set to operate at 110 VAC input, the Si3540 can be set by the user to operate at 220 VAC input by a simple switch selection.

Pluggable screw terminal blocks are provided for the I/O, motor, and AC power input. Mating connectors, programming cable with computer interface connector, as well as all operating software are provided with each Si3540 drive.

The Si3540 is both CE and TUV compliant.

Si Programmer
Intended for use in stand-alone applications, Si (Simple Indexer) Programmer provides quick, out-of-the-box use with an extremely friendly, point-and-click graphical interface that does not require any software programming experience. Once an Si program has been constructed and downloaded to the drive, the program can be executed stand-alone at power-up or from an external trigger. Constructing a program is accomplished through the use of instructions selected in a point-and-click manner. Once an instruction is selected, a "fill in the blanks" format is used to input parameters.

Constructing an Si program requires no prior programming experience nor does it require learning a programming language. Si Programmer generates the actual motion control program, based on user selected parameters, thereby eliminating syntax errors. Once created, programs are easily downloaded, uploaded, saved and printed.

Si Programmer also provides the capability to control digital inputs and outputs, useful for interfacing with external equipment like PLCs, sensors, end-of-travel switches, and more. Si Programmer has found success in all types of applications, from simple linear actuator applications to complete machine control with operator interface applications.

NOTE:   Power cord not included. See Accessories below to order.
(Specify Model Number)

What Other People Bought: When you see this icon, click on it to expand a list of products that other people have bought when they purchased this model.

Part Number/Desc.
Qty
Description
  
Si3540
Consult Sales  
Availability: 
 
 
Programmable step motor drive with integral power supply
Recommended Motors
  
OMHT17-075
THB4,930.00
Availability: 11 weeks
 
NEMA 17, 62.8 oz-in holding torque
  
OMHT17-275
THB3,613.19
Availability: 5 weeks
 
NEMA 17, 62.3 oz-in holding torque
  
OMHT17-278
THB4,274.14
Availability: 3 weeks
 
NEMA 17, 113 oz-in holding torque
  
OMHT23-393
Consult Sales  
Availability: 
 
 
NEMA 23, 76.6 oz-in holding torque
  
OMHT23-593
THB4,274.14
Availability: 5 weeks
 
NEMA 23, 79.3 oz-in holding torque
  
OMHT24-100
THB4,805.00
Availability: 5 weeks
 
NEMA 24, 123 oz-in holding torque
  
OMHT23-397
Consult Sales  
Availability: 
 
 
NEMA 23, 177 oz-in holding torque
  
OMHT23-597
THB4,765.13
Availability: 9 weeks
 
NEMA 23, 177 oz-in holding torque
  
OMHT23-400
Consult Sales  
Availability: 
 
 
NEMA 23, 264 oz-in holding torque
  
OMHT23-600
THB7,015.00
Availability: 1 week
 
NEMA 23, 264.8 oz-in holding torque
Accessories
  
HUB 444 DIN RAIL
Consult Sales  
Availability: 
 
 
Multi-axis network hub with DIN rail mounting kit
  
MMI-01
Consult Sales  
Availability: 
 
 
Operator Interface
OM-CONV-USB
OM-CONV-USB
THB912.74
Availability: 1 week
 
USB to RS232 Interface Converter; USB-A to DB9-male
  
Power Cord-SE
THB523.72
Availability: 4 weeks
 
AC Power cord with stripped end termination
  
Power Cord-SE-M16
THB720.00
Availability: 1 week
 
8' Power cord with M16 cable gland strain relief, 3x16 AWG, 250Vac max.
  
SI-PROG-CBL
THB1,315.00
Availability: 1 week
 
Replacement programming cable (comes with drive)
  
DRIVE-CBL
Consult Sales  
Availability: 
 
 
Replacement MMI and/or HUB communications cable (comes with MMI-01 and HUB 444)
  
DSUB-9-MF
Consult Sales  
Availability: 
 
 
DIN rail interface module, 9-pin
  
DSUB-9-MF-CBL
THB2,020.00
Availability: 1 week
 
DSUB cable, 9-pin, 2 m (6.6'), male/female connectors
All prices on this site are shown in Thai Baht.
Note: Programming cable and mating connectors are included. Programming software is a free download; click on "Software" icon below the picture. To see torque-speed curves for recommended motors, click on "Specs" above.
Ordering Example: (1) OM-CONV-USB USB to RS-232 Interface Converter, THB912.74  

Product Manuals:

Download Si3540 Series - Programmable Step Motor Driver Hardware Manual
Download STM, ST, Stac6, 1240i, 3540i, si3540 Series - Si Command Language (SCL) for Stepper Drives
We noticed you are from the US. Visit your local site for regional offers and live support.