Cart  |  Contact  |  Help  | 
Toll-Free in Taiwan: 0809 090 375
International+65 6415 5353

Dissolved Oxygen Analyzer/Controllers

DOCN601 and DOCN602

Dissolved Oxygen Analyzer/Controllers | DOCN601 and DOCN602

Dissolved Oxygen Analyzer/Controllers

See All Models Below

  • User-Friendly Design with Menu on the Front Panel
  • Easy to Read with Large, Bright LED Display
  • Quick and Easy to Calibrate
  • 0 to 20 ppm and 0 to 100% Ranges
  • Altitude Compensation
  • Membrane Perforation Alarm
  • Two Control Relays with ThirdRelay for High/Low Alarm
  • NEMA 4X Enclosure
Dissolved Oxygen Measurement Instrumentation - View related products

Description

DOCN601 Series Dissolved Oxygen analyzers/controllers are a rugged and dependable industrial grade microprocessor-based instruments that is extremely easy to use.
Its large, bright LED digital display is clearly visible even in direct sunlight. It’s speedy calibration and simple operator interface makes this analyzer/controller a favorite with instrumentation departments in a wide variety of demanding industrial and municipal applications. Frequently used functions are accessed through an intuitive step-through menu which is printed directly on the front panel for ease of navigation. By pressing the MENU key the operator scrolls through the menu, illuminating an LED beside the selected item and displaying the stored value. Arrow keys are used to change the value. Seldom used or set-once adjustments, such as password activation are located on DIP switches on the back of the swing-out front panel.
The DOCN600 Series accepts a sensor input from the DOE-601 sensor. The DOE-601 sensor consists of a probe that is fitted with a DOE-601-SC cartridge containing a precisely stretched permeable membrane, electrodes and electrolyte. The inexpensive and easy to change cartridge takes only minutes to replace. The cartridge is hermetically sealed. Optional mounting hardware includes submersion and “ball float” assemblies.
Calibration can be accomplished by using one of seven different calibration techniques: in the process to a portable meter; in clean water to a portable meter; in a process sample to a lab meter; in a clean water sample to a lab meter; in a saturated process; in saturated clean water and in air. To Calibrate, press the MENU key until the CALIBRATION LED illuminates. Use the arrow keys to set the value determined using a calibration method described above. Press The Enter key twice. The unit is now calibrated.
The DOCN600 Series provide three analog outputs, including a 4 to 20 mA, 0 to 5 Vdc and 0 to 1 mA. The instrument also provides control of external devices using its two independent control relays. An alarm relay has both high and low setpoints with a fixed deadband. When this relay is energized, the Alarm LED on the front panel also illuminates to clearly indicate an alarm condition. Factory set for bidirectional control, both control relays can be set to control either a rising or falling process, with easily programmed Relay On and Relay Off setpoints.
A self-diagnostics program clearly indicates any system errors or faults by turning the STATUS LED on the front panel from green to red. The operator then scrolls through the menu to STATUS to determine the fault code. The Operator’s Manual indicates the source and likely remedy for the fault. When the status fault is corrected the STATUS LED will turn back to green.
DOCN600 Series is packaged in a rugged NEMA 4X fiberglass reinforced polyester enclosure. It is ideally suited for heavy-duty outdoor applications such as municipal and industrial wastewater.
(Specify Model Number)
Part Number/Desc.
Qty
Description
Controllers
Quick Ship
DOCN601
Consult Sales  
Availability: 
 
 
110 Vac dissolved oxygen controller, surface mount
Quick Ship
DOCN601-PM
Consult Sales  
Availability: 
 
 
110 Vac dissolved oxygen controller, panel mount
Quick Ship
DOCN601-PIPE
Consult Sales  
Availability: 
 
 
110 Vac dissolved oxygen controller, pipe mount
Quick Ship
DOCN602
Consult Sales  
Availability: 
 
 
220 Vac dissolved oxygen controller
Quick Ship
DOCN602-PM
Consult Sales  
Availability: 
 
 
220 Vac dissolved oxygen controller, panel mount
Quick Ship
DOCN602-PIPE
Consult Sales  
Availability: 
 
 
220 Vac dissolved oxygen controller, pipe mount
Sensor
Quick Ship
DOE-601
TWD20,345
Availability: 6 weeks
 
1 1/4" NPT dissolved oxygen sensor (sensor only, cartridge DOE-601-SC is required for operation.)
Accessories
Quick Ship
DOCN600-PM
Consult Sales  
Availability: 
 
 
DOCN600 panel mounting kit
Quick Ship
DOCN600-PIPE
Consult Sales  
Availability: 
 
 
DOCN600 pipe mounting kit
Quick Ship
DOE-601-SC
TWD12,670
Availability: 6 weeks
 
Sensor cartridge hermetically sealed
Quick Ship
DOE-600-BFMK
Consult Sales  
Availability: 
 
 
Flotation mounting kit consists of ball float, extension pipe, junction box and 15 m (50') of cable
Quick Ship
DOE-600-SMK
TWD6,570
Availability: 6 weeks
 
Submersion mounting kit consists of 4FT PVC pipe, junction box and 15.2 m (50') of cable
All prices on this site are shown in Taiwan Dollars.
Note: Comes complete with operator’s manual.

DOE-601 is the sensor only; the sensor cartridge DOE-601-SC is required for operation.


Ordering Example:   (1) DOE-601 1 1/4, TWD20,345  plus (1) DOE-601-SC Sensor Cartridge, TWD12,670, TWD20,345 + 12,670 = TWD33,015