OMEGA’s FPUD300 Series drum
pumps can empty a wide variety of
containers in various applications.
Motor types available are singlephase,
115 or 230 Vac, 50/60 Hz,
continuous duty; and air driven.
Both the FPUD311 and FPUD321
electric motors are open drip-proof
(ODP), while the FPUD362 is
a totally enclosed fan-cooled
All three AC motors are thermaloverload
protected with a manual
reset, and all three include internal
cooling fan, built-in on/off switch,
3.6 m (12'), three-wire cord;
both 115 Vac motors include a
grounded wall plug.
The air operated unit has a ¼ MNPT
fitting for hooking up to a customersupplied
air hose, and includes a
flow-regulating valve and muffler. An
optional air lubricator/filter assembly
is also available.
When pumping flammable or
combustible materials, or for work
in explosive environments use the
FPUD331 air motor with a stainless
FPUD3-P Series tubes include a
variable orifice on the outlet to limit
flows to 10, 20, 30, or 40 GPM.
Refer to the performance curve
graphs on next page for flow rate
vs. discharge head data, and flow
rate vs time for the rechargeable
battery model. All FPUD3 Series
pump tubes are sealless to insure
leakproof operation. See tubing
products in section T.
SPECIFICATIONS Pump Tube Wetted Parts: FPUD3-P: Polypropylene, Inconel, and PTFE FPUD3-S: 316SS, PTFE, and Halar
Pump Tube Operating Temperature: Polypropylene: 71.1°C (160°F); 316SS: 104°C (220°F) Electric and Air Motors Pump Capability: 40 gpm, 24 m (80') TDH, 30-minute run-dry; air 30 gpm, 18 m (60') HD Pump Capability: 9 gpm, 4' TDH Max Fluid Viscosity: 100 cps, 1.6 specific gravity
CAUTION: DO NOT USE THE
FMXD11-AM AIR MOTOR WITHOUT
THE FPUD34-SK STATIC
† All prices on this site are shown in Taiwan Dollars. Note: Comes complete with operator's manual.
AC pump motors include integral power cords.
Power cords for 115VAC models include grounded wall plugs.