Cart  |  Contact  |  Help  | 
Toll-Free in Taiwan: 0809 090 375
International+65 6415 5353

Vortex Flow Meters for Industrial Applications

FV500C

Vortex Flow Meters | Industrial | FV500C

Vortex Flow Meters | Industrial

TWD129,760 DY050-DBMBA1-2D/FF1

  • Custom Built to Order - CONSULT FLOW ENGINEERING
  • SSP (Spectral Signal Processing) Technology
  • Measures Steam, Gas, and Low Viscosity Liquids
  • Clear Parallel Two-Line LCD Display. Displays Simultaneous Flow Rate and Total Along with Process Diagnosis
  • New, Compact Amplifier Housing: Lighter, Small and Easier to Handle
  • No Start-Up Tuning
  • Low Flow Stability
  • Advanced Self-Diagnostics
  • No Moving Parts
  • Simultaneous Analog and Pulse Outputs (Pulse requires Display)
  • Status Output (Flow Switch Function) or Alarm Output
  • Configurable Through Local Display Interface
  • High Accuracy: ±0.75% Rdg (Liquid), ±1% Rdg (Gas, Steam)
  • Learn more about the principle of vortex flow meters.
Vortex Shedding Flow Meters and Pitot Tubes - View related products

Description

THIS PRODUCT REQUIRES YOU TO CONSULT WITH FLOW ENGINEERING PRIOR TO ORDERING
Please be prepared to complete the "Vortex/Pitot Tube Order Questionnaire" (Download in the Related Links Below) so you can fax or email it to Flow Engineering.


OMEGA’s FV-500C Series vortex flowmeter provides accurate, reliable, low-maintenance flow measurement. Vortices generated by the flowing fluid stress the shedder bar in pulses, and the shedder bar transmits the stress pulses to the encapsulated piezoelectric sensor.

Please contact Omega FLOW Engineering by phone, fax, or email flow@omega.com to size the vortex flow meter for your application. All the vortex meters are custom built to order. A display is highly recommended for any fine tuning adjustments required.

Based on the field proven sensor technology of the FV-500C Series vortex flowmeters, FV-500C features a new amplifier with proprietary spectral signal processing (SSP) technology to analyze the vortex waveform into its spectral components to filter noise from signal for the most stable measurement possible.

The FV-500C Series will provide excellent vibration immunity for stable, accurate measurements at low flows without any need for start-up tuning. The user benefits through greater reliability, reduced maintenance and a lower total cost of ownership.

The programmable display allows access to the full power of OMEGA’s new intelligent amplifier. The display is required if you would like to access the pulse output programming. The display is highly recommend if an adjustment or tweaking is required for the flow measurement application. The display also permits the user to display flow rate and/or total in engineering units for liquids and gases. Rate and total are displayed simultaneously. If the density or enthalpy of the fluid is constant (i.e. the temperature and pressure do not change), the density value can be entered into the meter to display in kilograms, pounds or metric tons; the enthalpy value can be entered to display in BTUs, kilojoules, etc. Analog output span adjustment and low cutoff are also settable from the display, there is no need to adjust pots. The analog and pulse outputs can also be forced to output from 0 to 100% FS or 0 to 6000 Hz without any flow through the meter as a test of the amplifier. For steam flow measurement, the FV-500C can be used with the OMEGA™ FC-20 mass flow computer. The standard FV-500C is wafer-style to slip between 150# ANSI flanges, and comes supplied with extra long bolts for installation. Units with the suffix “-F” have 150# ANSI flanges, 300 lb flange mount is available.

Model No.
(Without Display Module)
Description Lay Length
(mm/inches)
Weight
(kg/lbs)
FV-505C1/2" wafer mount70 (2.8)2.8 (6)
FV-505C-F1/2" flange mount70 (2.8)2.8 (6)
FV-510C1" wafer mount70 (2.8)3.7 (8)
FV-510C-F1" flange mount70 (2.8)3.7 (8)
FV-515C1 1/2" wafer mount70 (2.8)4.3 (9.5)
FV-515C-F1 1/2" flange mount70 (2.8)4.3 (9.5)
FV-520C2" wafer mount75 (3.0)6 (14)
FV-520C-F2" flange mount75 (3.0)6 (14)
FV-530C3" wafer mount100 (3.9)9.4 (21)
FV-530C-F3" flange mount100 (3.9)9.4 (21)
FV-540C4" wafer mount120 (4.7)12.8 (28)
FV-540C-F4" flange mount120 (4.7)12.8 (28)
FV-560C-F6" flange mount270 (10.6)36.4 (80)
FV-580C-F8" flange mount310 (12.2)55.4 (122)
FV-591C-F10" flange mount370 (14.6)90 (199)
FV-592C-F12" flange mount400 (15.7)140 (308)
Note: Units with “ -F” suffix have 150 class flange connections, 300 lb flange mount is available if needed.
For units with a display, add “-D” to the part number and $403 to the price.
For units with remote electronics, add “-R” to the part number, subtract $455 from the price, and order the mounting kit and cable below.
For units designed for high temperature use, add “-HT” to the model number and consult engineering for prices.


THIS PRODUCT REQUIRES YOU TO CONSULT WITH FLOW ENGINEERING PRIOR TO ORDERING
Please be prepared to complete the "Vortex/Pitot Tube Order Questionnaire" (Download in the Related Links Below) so you can fax or email it to Flow Engineering.
(Specify Model Number)
Part Number/Desc.
Qty
Description
DY015-DBMAA1-2D/FF1
TWD111,370
Availability: 7 weeks
 
1/2" Wafer Style Vortex Flowmeter W/Display
DY015-DBMAA1-2N/FF1
TWD112,115
Availability: 7 weeks
 
1/2" Wafer Style Vortex Flowmeter
DY015-DBMBA1-2D/FF1
TWD126,615
Availability: 7 weeks
 
1/2" ANSI class 150 Flange Vortex Flowmeter W/Display
DY015-DBMBA1-2N/FF1
TWD95,385
Availability: 7 weeks
 
1/2" ANSI class 150 Flange Vortex Flowmeter
DY025-DBMAA1-2D/FF1
TWD110,255
Availability: 7 weeks
 
1" Wafer Style Vortex Flowmeter W/Display
DY025-DBMAA1-2N/FF1
TWD94,435
Availability: 7 weeks
 
1" Wafer Style Vortex Flowmeter
DY025-DBMBA1-2D/FF1
TWD126,615
Availability: 7 weeks
 
1" ANSI class 150 Flange Vortex Flowmeter W/Display
DY025-DBMBA1-2N/FF1
TWD111,000
Availability: 7 weeks
 
1" ANSI class 150 Flange Vortex Flowmeter
DY040-DBMAA1-2D/FF1
TWD111,745
Availability: 7 weeks
 
1 1/2" Wafer Style Vortex Flowmeter W/Display
DY040-DBMAA1-2N/FF1
TWD98,155
Availability: 7 weeks
 
1 1/2" Wafer Style Vortex Flowmeter
DY040-DBMBA1-2D/FF1
TWD126,615
Availability: 7 weeks
 
1 1/2" ANSI class 150 Flange Vortex Flowmeter W/Display
DY040-DBMBA1-2N/FF1
TWD112,655
Availability: 7 weeks
 
1 1/2" ANSI class 150 Flange Vortex Flowmeter
DY050-DBMAA1-2D/FF1
TWD113,025
Availability: 7 weeks
 
2" Wafer Style Vortex Flowmeter W/Display
DY050-DBMAA1-2N/FF1
TWD97,410
Availability: 7 weeks
 
2" Wafer Style Vortex Flowmeter
DY050-DBMBA1-2D/FF1
TWD129,760
Availability: 7 weeks
 
2" ANSI class 150 Flange Vortex Flowmeter W/Display
DY050-DBMBA1-2N/FF1
TWD113,975
Availability: 7 weeks
 
2" ANSI class 150 Flange Vortex Flowmeter
DY080-DBMAA1-2D/FF1
TWD121,815
Availability: 7 weeks
 
3" Wafer Style Vortex Flowmeter W/Display
DY080-DBMAA1-2N/FF1
TWD104,475
Availability: 7 weeks
 
3" Wafer Style Vortex Flowmeter
DY080-DBMBA1-2D/FF1
TWD153,555
Availability: 7 weeks
 
3" ANSI class 150 Flange Vortex Flowmeter W/Display
DY080-DBMBA1-2N/FF1
TWD137,770
Availability: 7 weeks
 
3" ANSI class 150 Flange Vortex Flowmeter
DY100-DBMAA1-2D/FF1
TWD119,550
Availability: 7 weeks
 
4" Wafer Style Vortex Flowmeter W/Display
DY100-DBMAA1-2N/FF1
TWD153,555
Availability: 7 weeks
 
4" Wafer Style Vortex Flowmeter
DY100-DBMBA1-2D/FF1
TWD169,370
Availability: 7 weeks
 
4" ANSI class 150 Flange Vortex Flowmeter W/Display
DY100-DBMBA1-2N/FF1
TWD135,540
Availability: 7 weeks
 
4" ANSI class 150 Flange Vortex Flowmeter
DY150-DBMBA1-2D/FF1
TWD205,435
Availability: 7 weeks
 
6" ANSI class 150 Flange Vortex Flowmeter W/Display
DY150-DBMBA1-2N/FF1
TWD189,620
Availability: 7 weeks
 
6" ANSI class 150 Flange Vortex Flowmeter
DY200-DBMBA1-2D/FF1
TWD306,365
Availability: 7 weeks
 
8" ANSI class 150 Flange Vortex Flowmeter W/Display
DY200-DBMBA1-2N/FF1
TWD290,580
Availability: 7 weeks
 
8" ANSI class 150 Flange Vortex Flowmeter
DY250-DBLBA1-2D/FF1
TWD526,095
Availability: 7 weeks
 
10" ANSI class 150 Flange Vortex Flowmeter W/Display
DY250-DBLBA1-2N/FF1
TWD510,855
Availability: 7 weeks
 
10" ANSI class 150 Flange Vortex Flowmeter
DY300-DBLBA1-2D/FF1
TWD643,215
Availability: 7 weeks
 
12" ANSI class 150 Flange Vortex Flowmeter W/Display
DY300-DBLBA1-2N/FF1
TWD627,225
Availability: 7 weeks
 
12" ANSI class 150 Flange Vortex Flowmeter
Accessories
DYC-1-CF
TWD14,795
Availability: 7 weeks
 
100 Foot Cable
DYC-1-1F
TWD4,530
Availability: 7 weeks
 
10 Foot Cable
DYC-1-3F
TWD6,700
Availability: 7 weeks
 
30 Foot Cable
DYC-1-5F
TWD8,910
Availability: 7 weeks
 
50 Foot Cable
DYC-1-7F
TWD11,815
Availability: 7 weeks
 
70 Foot Cable
DYA-D2N
TWD38,530
Availability: 7 weeks
 
Integral to Remote Electronics
DYA-D2D
TWD53,235
Availability: 7 weeks
 
Integral to Remote Electronics Display
All prices on this site are shown in Taiwan Dollars.
Note: Comes with complete operators manual.

300 lb flange mount are available at an additional cost, Consult Flow Engineering for price.

For units with remote electronics, add suffix "-R" to the model number; no additional cost. **Units with remote electronics require a mounting kit and cable from the Accessories list.

For units designed for high temperature applications, add suffix "-HT" to the model number; Consult Flow Engineering for price.

For NIST calibration, add suffix "-NIST" to the model number; add $350 to the price.

A display is required to access pulse output programmability.


(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)


We noticed you are from the US. Visit your local site for regional offers and live support.